Yokogawa TX10 Series
Portable Digital Multi-Thermometer

• Simplicity Allows for ease of use
• Supports type K/J/E/T thermocouples
• Lightweight
• Data Hold Option

Yokogawa TX10-03 Shown
 

Thermocouple probes (-200°C to 1372°C) [-328°F to 2501.6°F]
Type K : -200 to 1372 deg.C [-328 to 2501 deg.F]
Type J : -200 to 1000 deg.C [-328 to 1832 deg.F]
Type E : -200 to 700 deg.C [-328 to 1292 deg.F]
Type T : -200 to 400 deg.C [-328 to 752 deg.F]
(Possible temperature ranges with the TX10 Series)


1-channel Single-function Model (TX10-01 Only)

• TC Type
  Select the thermocouple type (K, J, E, and T) for the initial setting.
  (The type K is factory-set at shipment)
  Press and hold down the TC TYPE key while pressing the POWER key.
  The TX10 enters the thermocouple type selection mode, and each press of the TC TYPE key switches between the thermocouple types.
  Then accept the setting with the POWER key.
  (Make sure that the characters in the display have changed.)
  
• Data Hold
   

• Memory-in Function
  Up to ten data items can be stored. When recalled, the stored data value is displayed with its memory number.
  
• User calibration function
  Calibration and adjustment can be mode easily by operating the panel keys on instrument and a measurement-standard.

• TC Type
  Select the thermocouple type (K, J, E, and T) for the initial setting.
  (The type K is factory-set at shipment)
  Press and hold down the TC TYPE key while pressing the POWER key.
  The TX10 enters the thermocouple type selection mode, and each press of the TC TYPE key switches between the thermocouple types.
  Then accept the setting with the POWER key.
  (Make sure that the characters in the display have changed.)
  
• CH (TX10-03 Only)
  With each press, the channel switches through the sequence of “chA,” “chB,” and then “chA-chB.”
• Data Hold
  A held measured value, can be stored in the memory of an optional memory number, which is selected with the up and down keys.
• Record
  • Maximum and minimum record key
    Stores the maximum and minimum values from the time the RECORD key is pressed.
  • Data record key
    Stores the held measured value in memory. (Up to ten)
• Resolution Select Key ( Range )
  With each press, resolution alternates between0.1°C and 1°C. (Within the range of -200.0°C to 199.9°C)
• Maximum and Minimum Values, and stored Data Read Key (Read)
  Every time this key is pressed, the maximum and minimum values, stored data, and the current measured data are displayed in sequence.
• Rel/Adj Key
  • Relative display select key
    Displays measured values with reference to the value obtained immediately before this key was pressed (relative value). Each press of this key can select or release the relative display.
  • Simplified correction mode key
    Sets the correction value, and selects active/inactive of the simplified correction function.
• Data call up key
  Used to select a memory number when calling up stored data. Also used to adjust the correction value for simplified correction mode