Yokogawa 734 Series
50,000 count DMM with True RMS

High accuracy 0.04% at DC voltage and 50,000 count / 51-segments bar graph display. 73401 can be used for many types of situation such as electrical work, maintenance and R&D. IR communication allows easy management of measured data.
IR communication function
Internal memory function to store measured data
User calibration function
Shockproof elastomer casing
Safety shutters prevent erroneous insertion of test leads into current measurement terminals (so called "Terminal Shutters")
Memory function saves 50 data in manual-mode memory & 600 data in logging-mode memory (73402 Only)

Yokogawa 73401 Shown

Product Information
Datasheet	268 KB
Specifications	34 KB
Manual	248 KB
Ordering Info
PDF Help

4.5 digits (50,000-count, 51-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature Features: Internal memory, Communication function, User calibration function

Peak hold function (73402 Only, for DC V/A measurement)
Supports waveforms of 1 ms or greater. You can capture instantaneous crest values not possible with ordinary maximum measurement functions.

Relative and percentage value computation
Can display the measured values as the values relative to a reference value (defined by the REL key; even after data hold) or as the percentages of the reference value. Percentage calculation: (Measured value – reference value) / (reference value), expressed as percentage.

Duty ratio (%) measurement
Displays the duty ratio of a pulse waveform: High level period/1 cycle of waveform) x 100 = (t2/t1) x 100 [%]

AC+DC measurement
Measures RMS of a waveform in which ripple waveforms are superimposed on a direct current.

Auto hold
Automatically hold the data measured when the test leads are disconnected from the measured object, thus freeing both hands for performing reliable measurement.

Minimum/maximum/average display
Allows recording of minimum, maximum and average values along with their respective times (time passed since the start of measurement)

Decibel calculation
Computes the logarithm of an alternating current, and uses it together with the relative value computation to display the relative value. You can select the standard resistance according to the application, such as audio or communication circuit signal measurement.

50,000-count, 51-segment bar graph display
Allows simultaneous display of frequency and voltage, frequency and duty ratio or decibels and voltage on dual display. The 734-02 has a black-lit display for easier viewing.

Management with special application software
You can display measured data as a table and trend graphs. Real-time data transmission allows you to see moment-to-moment changes at a glance. In addition, when displaying DMM data on a PC screen they are enlarged to allow you to easily discern new data.

General Specifications	73401/02
Additional Functions	RS-232C, data memory, max/mini value memory, relative/percentage value computation, logarithm computation, data/auto hold, peak hold (73402 only), over voltage warning, backlight(73402 only)
Display	Digital Display: 50,000-count Digital Reading; 51-segment Bar graph
Measuring Rate	Digital Display: Approx. 3 times/sec; Bar graph Display: 10 times/sec
Operating Temp. and Humidity	-10°C to 50°C; 80% RH or less at -10°C to 40°C, or 70% RH or less at 40°C to 50°C (no condensation
Storage Temp. and Humidity	-25°C to 60°C, 70 RH or less (no condensation)
Temperature Co-efficient	Add the accuracy 0.05/°C to the basic accuracy at a temperature within -10°C to 18°C and 28°C to 50°C
Withstanding Voltage	5.55 kV AC for 1 minute (between input terminals and casing)
Auto Power Off	Approx. 20 minutes if no activity with unit is detected (can be disabled)
Power Supply	Two AA (R6) dry cells
Battery Life	Approx. 120 Hours
Dimensions	Approx. 85(W)x191(H)x40(D)mm
Weight	Approx. 450g (with batteries)

Ordering Information
Model	Description	Buy Online	Price
73401	Yokogawa 73401 50,000 count DMM with True RMS, RS232 COMM		$379.00
73402	Yokogawa 73402 50,000 count DMM with True RMS, RS232 COMM		$411.00
Included Accessories
	1 - Instruction Manual 2 - AA (R6) dry cells (built in) Batteries 1 - Test Lead Set (RD031)	Included
Optional Accessories
Model	Description	Buy Online	Price
92010E	Yokogawa 92010-E Communication cable D-SUB 9-pin Plus Software		$163.00
Carrying Cases
B9646HH	Yokogawa B9646HH Hard case, 7544, 732		$37.00
93014	Yokogawa 93014 Hand Case for 734		$64.00
Fuses
A1518EF	Yokogawa A1518EF Fuse for 732, 733, 734		$9.00
A1519EF	Yokogawa A1519EF Fuse for 732, 733, 734		$9.00
Printer Equipment
97010	Yokogawa 97010 Printer with 1 roll thermal paper and 1 battery pack		$756.00
94006	Yokogawa 94006 AC Adapter Power Supply 200-240V AC For Printer (europe)		$125.00
94007	Yokogawa 94007 AC Convertor for Printer (120V)		$125.00
97080	Yokogawa 97080 Thermal paper for printer (10 rolls)		$85.00
Test leads and Clamps
96001	Yokogawa 96001 AC Current Clamp, 20 Hz - 20 kHz 400 A AC		$310.00
B9646HF	Yokogawa B9646HF Alligator Clip		$15.00
RD031	Yokogawa RD031 Lead Cable for Measurement (CA51 and CA71)		$10.00
97080	Yokogawa 97080 Thermal paper for printer (10 rolls)		$85.00
Temperature Probe
90050	Yokogawa 90050 Temp. Probe TYPE K - Liquid		$82.00
90055	Yokogawa 90055 Temp probe TYPE K -Surface		$165.00

Yokogawa 734 Series 50,000 count DMM with True RMS

Yokogawa 734 Series
50,000 count DMM with True RMS