|
WD1000HPT Contains |
|
WP120 Soldering Iron |
Combining a compact,
powerful heating element with a replaceable soldering tip
the WP 120 guarantees dynamic performance. The rapid
transfer of heat into the soldering tip is quickly and
precisely controlled with sophisticated electronics which
allows the WP 120's compact design to cope with big and
difficult solder joints. |
|
WD1M Power Unit |
The microprocessor
controlled WD1M has a number of in built special functions
which make it ideally suited for use in production, rework
and laboratory environments.WD1Ms' from April 2008 on are
supplied with new advanced software specially designed for
the WP 120 iron. |
WDH10T Stop +
Go Iron Safety Rest |
Using the special menu
on the WD 1M iron setback time and temperature as well as
auto off time can be programmed and they are automatically
activated when the soldering iron is placed into the WDH 10T
safety rest. When the iron is removed from the rest tip
temperature is restored immediately to the set working
level. Using this Stop + Go safety rest is an easy and
effective way to increase tip life particularly when using
lead free solder. |
|
WDC2 |
Dry Tip Cleaning System |
|
|
|
|
Mains power supply |
120 V / 50/60 Hz |
|
Power |
160W |
| Temperature control |
150°F -850°F (50°C -450°C) |
| Temperature accuracy |
+/-17°F (+/-9°C) |
| Temperature stability |
+/-9°F (+/-5°C) |
| Soldering tip leakage resistance |
<2 ohm (tip-to-ground) |
| Soldering tip leakage current |
<2mV (tip-to-ground) |
|
Compatibility |
The WP120 pencil is compatible with the
“M”power bases rated for 160 watts (date code 04/08 or
later) |
)
