Vitrek 930i AC Ground Integrity Analyzer Specifications

Alternating Current Output
Range	3 to 30 amperes RMS, programmable
Resolution	1 amp
Output Frequency	Sinewave synthesis, 50 Hz to 400Hz
Compliance Voltage	3 volts RMS
Regulation	± 0.25% no load to full load
Resistance Measurement
Resistance Limit	User programmable max. and min. Test is automatically aborted when limit is exceeded.
Resistance Range	1Ω at 3 amps linearly decreasing to 100 mΩ at 30A
Resistance Resolution	10mΩ
Measurement Accuracy	± 1.0% of reading; ± 0.5% of range
Accuracy	Specifications apply for 1 year, +/- 5°C from the cal temp within 20°C to 30°C
Calibration	Certificate of calibration traceable to the National Institute of Standards and Technology (NIST) provided
Test Time	Digital count down timer, programmable 1 to 9999 seconds
Terminal Configuration	True four-wire kelvin
General Specifications
Remote Interface	VICL and serial com standard. PLC optional.
Display	40 character dot matrix illuminated liquid crystal display
Indicators	L.E.D. status indicators
Alarm	Audible and visual alarms provide pass/fail indication
Diagnostics	Built-in self diagnostics test ROM, RAM and output system
Safety	CE mark certified to EN61010
Accessories	K-2, VIC-3, BBL-2 and operators manual supplied with unit
Warranty	Extended 5 year parts and labor with annual factory calibration and maintenance. Standard warranty one year.
Operating Temperature	0°C to 50°C
Humidity	90% RH 0°C to 40°C
Power	115/230 VAC +/- 10% 250 VA max
Dimensions	89mmH x 432 mmW x 457mmD (3.5"H x 17"W x 18"D)
Weight	11Kg (24 lb.) Net/15Kg (34 lb.) shipping

Vitrek 930i Automatic AC Ground Integrity Analyzer Specifications

Vitrek 930i
Automatic AC Ground Integrity Analyzer Specifications