Tektronix 11400 Digitizing Oscilloscope Series Specifications - Used Test Equipment at Test Equipment Depot

VERTICAL SYSTEM
Accuracy with Enhanced Accuracy	Depends on plug-in unit
Equivalent-Time Bandwidth	Depends on plug-in used
Vertical Resolution	10 bits (1024 levels). Resolution can be increased to 14 bits (16384 levels) using signal averaging.
HORIZONTAL SYSTEM
Time Bases	Two identical built-in time bases. Record duration-5.12 ns to 1024 s in 1-2-5 sequence.
Time-Base Accuracy	100 ps +0.002% of measurement interval
Record Length	512 points to 10,240 points
Sampling Rate	20 MS/s maximum
Main Record Positioning	Position of the main record with respect to the trigger point of the main record. Pretrigger: 1 record duration. Posttrigger: 1 record duration. Resolution: 1 main record point.
Windows	In addition to the main record, either one or two window records may be acquired and displayed. The window records may be of different length (duration) and may have a smaller time/div than the main record.
Window Record Positioning	The window records are positioned relative to a window trigger point, which may be positioned relative to the main record's trigger point delayed by either time or events.
Main-Window Time Measurement	The time between the MAIN record trigger and the WINDOW trigger can be measured precisely, even if each trigger occurs only once. Repetitive events allow this measurement to be averaged for better resolution and accuracy. Single Trigger Precision: 200 ps. Repetitive Precision: 10 ps, after 100 averages. Accuracy: 250 ps +0.002% of record duration.
TRIGGERING SYSTEM
Range	± Full Screen
Bandwidth	500 MHz maximum
Coupling and Sensitivity
DC Coupled	0.35 div from dc to 50 MHz, increasing to 1 div at 500 MHz.
Noise Reject Coupled	1.2 div or less from dc to 50 MHz, increasing to 3 div at 500 MHz.
AC Coupled	0.35 div from 60 Hz to 50 MHz increasing to 1 div at 500 MHz. Attenuates signals below 50 Hz.
HF Reject Coupled	0.5 div from dc to 30 kHz.
LF Reject Coupled	0.5 div from 80 kHz to 50 MHz, increasing to 1 div at 500 MHz.
Holdoff Range	500 ns to 10 s.
MEASUREMENT SYSTEM
Waveform-Processing Functions	Waveform Functions: Differentiate, integrate, interpolate, smooth, average, and envelope. Arithmetic Operators: Plus, minus, multiply, divide, square root, logn, absolute value, signum, exp.
Measurement Set	Amplitude Measurements: Min, max, mid, mean, peak-peak, RMS. Timing Measurements: Rise, fall, width, delay 1, main®window, period, propagation delay, and frequency. Area and Energy: Area +, Area -, energy. Cursors: Single or dual dots, split or paired mode, horizontal and vertical bars, measurement-zone delimiters.
CRT AND DISPLAY FEATURES
Standard CRT	9 in. diagonal, monochrome, magnetic deflection. Vertical raster-scan orientation.
Standard Phosphor	GH (P31).
Video Resolution	552 horizontal by 704 vertical displayed pixels.
POWER REQUIREMENTS
Line-Voltage Ranges	90 to 132 V RMS. 180 to 250 V RMS.
Line-Frequency	48 to 440 Hz.
Maximum Power Consumption	320 Ω
ENVIRONMENTAL AND SAFETY
Temperature	Operating: 0 to +50°C. Non-operating: -40 to +75°C.
Humidity	Operating and Non-operating: Up to 95% relative humidity, up to +50°C.
Altitude, Vibration, Shock, Bench Handling	Meets MIL-T-28800C, Type III, Class 5.
Electromagnetic Compatibility	Meets MIL-T-28800C; MIL-STD-461B; FCC Part 15, Subpart J, Class B; VDE 0871/6.78 Class B; CE-01 Part 4, with exceptions; CE-03 Part 4, Curve 1; CE-03 Part 4, Curve 4, Navy, NB, BB (with exceptions); CS-01 Part 7; CS-02 Part 4 (with exceptions); CS-06 Part 5; RE-01 Part 4 (with exceptions); RE-02 Part 4; RS-01 Part 4; RS-03 Part 7 (limited to 1 GHz).
Safety	Listed UL 1244; CSA Bulletin 556B, September 1973; Tektronix self-certification to comply with IEC 348 recommendations.
PHYSICAL CHARACTERISTICS
	Cabinet		Rackmount
Dimensions	mm	in.	mm	in.
Width Height Depth	448 238 599	17.6 9.4 23.6	483 222 550	19.0 8.8 21.6
Weights »	kg	lb	kg	lb
Net Shipping	19 28.0	41.6 62.0	22.0 31.4	48.0 68.0