Hewlett Packard 11792A
Sensor Module, 50 MHz-26.5 GHz, Refurbished

• Frequency range: 50 MHz to 26.5 GHz
• Measurement range: 10 µW to 1W ( -20 dBm to +30 dBm)
• 50 ohm impedance
• 3.5mm (m) connector
• For use with 8901B modulation analyzer or the 8902A measuring receiver in combination with the 11793A down convertor

HP 11792A sensor module gives you all the performance of the HP 8902S system, plus superb power-measurement accuracy, at a single connector.  You can characterize a signal without manually switching between the power sensor and the receiver input.

Each HP 11792A Sensor Module is individually calibrated, traceable to the U.S. National Bureau of Standards. The calibration factors are printed on the sensor module for easy reference.  Enter these factors into the HP 8902A's non-volatile memory and the instrument automatically compensates for the power sensor's efficiency and mismatch loss at each frequency.   The HP 11792A is available with either a 3.5 mm precision or Type-N connector.

The 11792A provides internal on/off switching controlled by the 8902A.