Hewlett Packard 6114A 40 Watt Precision Power Supply Specifications, Refurbished HP Agilent Hewlett Packard - Used Test Equipment at Test Equipment Depot

DC OUTPUT	Voltage and current output can be adjusted over the range indicated by front-panel controls or analog programming. 0-20 volts, 0-2 amperes 20-40 volts, 0-1 amperes
Model features automatic dual-range operation, which eliminates manual range switching.
Load Effect	constant-voltage deviation, 0.0005% + 100 µV. Constant-current deviation, 0.01% +500µA.
Source Effect	Over the rated input voltage range: constant-voltage, 0.0005% + 100µV; constant-current, 0.005% +40 µA.
PARD (ripple and noise)	rms/p-p, 20 Hz to 20 MHz; CV 40 µV/200 µV, CC 200 µA/1 mA.
Temperature Coefficient	CV, 0.0001% + 15 µV/°C; CC, 0.02% + 50 µA/°C.
Drift	CV, 0.0015% + 15µV per 8 hours, 0.0075% + 30 µV per 90 days.
Output Voltage Accuracy	Output voltage accuracy obtained from front-panel controls at 23 ± 3°C at any ac line voltage and load current within rating and following a five-minute warm-up: 0.025% + 1.0 mV.
Resolution	Front-panel voltage control, 200 µV; front-panel current control, 2 mA.
Output Impedance	Typical value is approximated by 0.05 mΩ in series with 3 mH.
Load Transient Recovery time	Less than 50 µS is required for output voltage (constant voltage operation) to recover within 50 mV of the nominal output level following a change in output current equal to the current rating of the supply.
Remote Programming Speed	Up programming of voltage at full load: 1.75 s. Down programming, no load: 350 ms.
Overvoltage Protection Crowbar	Adjustable front-panel screwdriver control from 0.5 to 45 volts.
Power	104-127 or 208-254 Vac (switchable), 48-440 Hz, 150 VA max.
Temperature Rating	Operating, 0 to 50°C; storage, -40 to +75°C.
Size	197 mm W X 165 mm H X 337 mm D (7.75" X 6.5" X 13.25")
Weight	7.7 kg (17 lb) net, 9.5 kg (21 lb) shipping.

Used Equipment Catalog

$20.00 Minimum on Total Order