<< HP 8711A Product Page

HP / Agilent 8711A
300 kHz - 1300 MHz Network Analyzer Specifications

SOURCE CHARACTERISTICS
Frequency
Range	300 kHz to 1300 MHz
Resolution	1 Hz
Accuracy	< 5ppm
Output
Power Range	0 to 16 dBm w/attenuator: -60 to 13 dBm 75 Ω reduces output by 3 dB
Resolution
Port Flatness	+/-1.0 dB w/attenuator: -60 to 13 dBm w/meter correction: ± 0.3 dB
Single Purity
Harmonics	< -30 dBc
Spurious	< 30 dBc
Phase Noise	< 67 dBc/Hz, at 10 kHz (typical)
RECEIVER CHARACTERISTICS
Frequency Range	Narrowband: 300 kHz to 1300 MHz Broadband: 10 MHz to 1300 MHz
Dynamic Range
50 Ω Narrowband	> 90 dB
Broadband	> 66 dB
75 Ω Narrowband	> 87 dB
Broadband	> 63 dB
MAXIMUM INPUT (0.1 dB compression)
Narrowband	10 dBm
Broadband	16 dBm
Input Damage Level	20 dBm
TEST SET CHARACTERISTICS
Test Port Match	20 dB
System Directivity	40 dB
RF CONNECTORS
Test Ports	50 Ω Type N (f) 75 Ω Type N (f)
PHYSICAL CHARACTERISTICS
Size	180 mm H X 430 mm W X 480 mm D (7 in X 17 in X 18.75 in)
Weight	Net, 20.5 kg (45 lbs.); shipping, 25 kg (55 lbs.)
DETECTORS/BRIDGES
HP 86200A 50 Ω Scalar Detector	An external scalar detector for use when measuring external 50 Ω devices.
HP 86201A 75 Ω Scalar Detector	An external scalar detector for use when measuring external 75 Ω devices.
HP 86205A 50 Ω Bridge	An external directional bridge which offers high directivity and excellent port match designed for 50 Ω device measurements.
HP 86207A 75 Ω Bridge	An external directional bridge which offers high directivity and excellent port match designed for 75 Ω device measurements.
External detectors (50 and 75 Ω) and bridge are available for remote device measurements. An unmodulated dc detection mode measures the microwave power directly without using modulation techniques.
UPGRADE KITS
The following upgrade kits add optional measurement capability to existing HP 8711A network analyzers.
HP 86223A Attenuator Upgrade Kit	Provides the necessary components to retrofit an HP 8711A with a 60 dB step attenuator (Option 1E1). Includes installation at an HP service center. Also available as HP p/n 08711-60060.
HP 86224A IBASIC Upgrade Kit	Provides the necessary components to retrofit an HP 8711A with IBASIC capabilities (Option 1C2). Includes installation at an HP service center. Also available as HP p/n 08711-60061.
NP C1405A/ABA DIN Keyboard	PC keyboard to enhance editing capability (Option 1CL).
Calibration Kits	Accuracy enhancement characterizes the systematic errors by measuring known devices (standards) over the frequency range of interest. Kits for the HP 8711A contains standards to characterize these errors.
HP 85032E 50 Ω Calibration Kit	Contains 50 Ω Type N standards used to calibrate the HP 8711A for measurements of devices with 50 Ω Type N connectors. Standards include fixed termination, open circuit and short circuit.
HP 85036E 75 Ω Calibration Kit	Contains 75 Ω Type N standards used to calibrate the HP 8711A for measurements of devices with 75 W Type N connectors. Standards include fixed termination, open circuit, and short circuit.
ACCESSORIES
HP 11852B 50/75 Ω Minimum Loss Pad	A low SWR minimum loss pad required when measurements are made on 75 Ω devices using a 50 Ω measurement system.
HP 11853A Type N Accessory Kit	Accessory kit which provides the RF components required for measuring devices having 50 Ω Type N connectors.
HP 11854A BNC Accessory Kit	Accessory kit which provides the RF components required for measuring devices having 50 Ω BNC connectors.
HP 11855A Type N Accessory Kit	Accessory kit which provides the RF components required for measuring devices having 75 Ω Type N connectors.
HP 11856A BNC Accessory Kit	Accessory kit which provides the RF components required for measuring devices having 75 Ω BNC connectors.
HP 86211A Type N/TNC Adapter Kit	Adapter kit which provides Type N to Type F adapters necessary when measuring Type F devices on a network analyzer with Type N ports.
HP86212A Type N/TNC Adapter Kit	Adapter kit which provides Type N to TNC adapters necessary when measuring TNC devices on a network analyzer with Type N ports.
Test Port Cables	Replacement test port cables are available as HP part numbers. The analyzer ships with the 50 Ω BNC cable as standard.

HP / Agilent 8711A 300 kHz - 1300 MHz Network Analyzer Specifications

HP / Agilent 8711A
300 kHz - 1300 MHz Network Analyzer Specifications