Fluke Fiber Test Kits Complete Specifications - Used Test Equipment at Test Equipment Depot

Fiber Test Kits
	FTK100 Optical Fiber Kit Basic	FTK200 Optical Fiber Kit Pro
	FM130 Fiber Meter	FM150 Fiber Meter
Detector Type	Germanium	Germanium
Calibrated Wavelengths	850 nm, 1300 nm,1310, and 1550 nm	850 nm, 1300 nm,1310, and 1550 nm
Measurement Range	+6 dBm to -50 dBm	+6 dBm to -50 dBm
Resolution	0.01 dB	0.01 dB
Loss and Power Measurement Accuracy	± 0.25 dB at 25°C and -10 dBm	± 0.25 dB at 25°C and -10 dBm
Temperature Range Operating	0 °C to +50 °C;Storage: -30 ° C to +60 ° C	0 °C to +50 °C;Storage: -30 ° C to +60 ° C
Humidity Range Operating	0 to 95% RH,non-condensing	0 to 95% RH,non-condensing
Battery Type and Life	9 V alkaline (NEDA 1604A or IEC 6LR61); 50 hours typical with alkaline battery	9 V alkaline (NEDA 1604A or IEC 6LR61); 30 hours typical with alkaline battery
Battery Life Indication	One-button operation displays percentage of battery life remaining	One-button operation displays percentage of battery life remaining
Low Battery Indication	BAT appears on the display	BAT appears on the display
Display	4-digit LCD display	4-digit LCD display
Memory	---	Stores up to 500 measurements for each wavelength. Measurements are stored in non-volatile memory, which is retained when power is off or the battery is changed. Memory contents can be uploaded to a PC or sent directly to a serial printer.
Dimensions	3.2 in x 5.8 in x 1.5 in(8.1 cm x 14.7 cm x 3.8 cm)	3.2 in x 5.8 in x 1.5 in(8.1 cm x 14.7 cm x 3.8 cm)
Weight	8.6 oz (244g)	8.6 oz (244g)
	FOS-850/1300Fiber Optic Source	FS150 Fiber Source
Light Source	Infrared LED	Infrared LED
Wavelength	850 nm ± 30 nm;1300 nm -40 nm/+50 nm	850 nm ± 30 nm;1300 nm -10 nm/+50 nm
Output Power	-20 dBm nominal into 62.5 µm multimode fiber	-20 dBm nominal into 62.5 µm multimode fiber
Connector	ST	ST
Beam Divergence	0.3 radians	---
Maximum Output	200 µ w (radiated into free space)	---
Stability	± 0.2 dB per 8 hours at 20 °C after 20 minute warm-up	± 0.1 dB per 8 hours at 25 ° C
Temperature Coefficient	-0.08 dB per ° C, <18 ° C or >28 ° C	---
Battery Type and Life	9 V alkaline (NEDA 1604A or IEC 6LR61);24 hours typical with alkaline battery	9 V alkaline (NEDA 1604A or IEC 6LR61);30 hours typical with alkaline battery
Low Battery Indication	Blinking LED	Blinking LED in power switch
Temperature Range	Operating: 0 ° C to 40 ° C; Storage: -20 ° C to +70 ° C	Operating: 0 ° C to 50 °C; Storage: -20 ° C to +70 ° C
Humidity	Up to 75% RH, 0 ° C to 40 °C	Up to 90% RH
Conformance	CE and IEC 1010-1	CE
Dimensions	4.5 in x 2.5 in x 1.5 in(11.4 cm x 6.4 cm x 3.8 cm)	3.2 in x 5.6 in x 1.5 in(8.1 cm x 14.2 cm x 3.8 cm)
Weight	5.0 oz (142 g)	7.2 oz (204g)
	FT120 and FT140 Fiber Viewers
Wavelength	850 nm 1310 nm	1550 nm
Optical Density	2.05 5.10	4.30
Attenuation	20.5 db 51.0 db	43.0 dB
Peak Power Rating	49 mW 1000 W	190 W
Magnification	FT120: 200X; FT140: 400X	---
Fiber Adapter	2.5 mm universal ferrule adapter for multimode or singlemode fibers
Power Supply	Three 1.5 V AAA batteries (NEDA 24A or IEC LR03).35 hours typical use with alkaline batteries.
Light Source	White LED (100,000 hour life)