|
<<
UniSource Educational Trainers |
UniSource EIS-2000
Electric Installation Safety Measurement Trainer
|
- The ideal tool for engineering, training and
the simulation of measurement on electrical
installations
- Fault simulation of electric installations
and demonstration of actual measurements
- Education of electrical installations and
education of measuring instrument usage
- Electrical installation system training /
1-Phase, 3-phase, 3-phase 4 wire (R/S/T/N)
- Measurement training: AC voltage, earth
resistance, earth voltage, phase insulation
resistance, phase test, live line test, resistance
by leakage current, capacitance by leakage current,
and DC voltage
- Fault simulation: ELB training,
circuit-breaker training, leakage current variable
testing, earth resistance variable testing, loop
testing, RCD protection switch tests, and battery
voltage tests
|
 
UniSource EIS-2000
Shown
|
|
|
|
Specifications |
|
Insulation Resistance |
1-phase power line |
0.08MΩ, 0.1MΩ, 0.2MΩ, 1MΩ, 10MΩ, 100MΩ, 200MΩ,
OPEN |
|
3-phase power line |
L1: 0.2MΩ, 0.5MΩ, 1MΩ, 10MΩ, 100MΩ, 200MΩ,
500MΩ, OPEN |
|
L2: 0.3MΩ, 0.75MΩ, 2MΩ, 20MΩ, 150MΩ, 300MΩ,
400MΩ, OPEN |
|
L3: 0.09MΩ, 0.1MΩ, 0.2MΩ, 1MΩ, 10MΩ, 100MΩ,
200MΩ, OPEN |
|
Ground Resistance |
2 point earth test |
Water pipe:7.5Ω |
|
Heater:10Ω |
|
GAS Pipe:3Ω |
|
Radiator:100Ω |
|
Motor:10Ω |
|
3 point earth test |
1Ω, 2Ω, 3Ω, 5Ω, 7.5Ω, 10Ω, 30Ω, 110Ω variation
of earth resistance value |
|
Auxiliary Earth Resistivity |
0~10KΩ variable: 2 each |
|
Earth Point Rod |
PE1 / PE2 / P1 / P2 / P3 / C1 / C2 (6 each) |
|
Earth Voltage |
0V, 6V, 9V selectable |
|
Phase Test Points |
U(L1), V(L2), W(L3) |
|
Leakage Current Load for Test |
R-Load 1 |
1KΩ, 10KΩ, 100KΩ, 200KΩ, 300KΩ, OPEN |
Leak current
(R-load 2) |
30mA, 15mA, 2mA, 1mA, 0.4mA, 0.2mA, 0.1mA, OPEN |
|
Leak C-load |
0.033㎌, 0.01㎌, 0.001㎌, OPEN |
|
DC Voltage Output for Test |
0V, 5V, 12V, 24V / max.1 Ampere |
|
Electric Leak Breaker |
1-phase 15A / 30mA (3 each) |
|
Circuit Breaker |
3-phase 4 wire 10A : 1ea / 3-phase 3 wire 10A (1
each) |
|
AC Output Socket for Load |
1-phase,2 each (outlet 1, outlet 2) |
|
3-phase, 4 wire + PE (outlet 3) |
|
Power Indicator |
AC (8 each) |
|
DC (1 each) |
|
Input Power |
Option 1 |
1-phase: 110V ±15%(50/60Hz) |
|
3-phase: 220V ±15% (50/60Hz) |
|
4 wire (L1/ L2/ L3/ N) |
|
co-PE |
|
Option 2 |
1-phase: 220V ±15% (50/60Hz) |
|
3-phase: 380V ±15%(50/60Hz) |
|
4 wire (L1/ L2/ L3/ N) |
|
co-PE |
|
Dimensions |
660(W) X 550(H) X 170(D) mm |
|
Weight |
Approx. 20 lbs |
|
|
|
|
)
PDF Help