GE Telaire Airestat 5000 Series CO2 and Temperature Transmitter, GE Telaire 5001, 5003, 5005 and 5007

The Telaire 5000 Series Airestat CO2 and temperature transmitters are a low-cost, wall-mounted sensing solution for demand-controlled ventilation. The Airestat provides an intuitive VLI (Visual Limit Indicator) display for CO2 thresholds, a passive temperature output (20kΩthermistor), and a standard analog 0 to 10 volt signal to maintain air quality in enclosed spaces (such as school classrooms, offices, gymnasiums and theaters.) TheT5000 series also offers a digital UIP (User Interface Program) to configure internal CO2 concentration thresholds (optional accessory cable and software not included.) The factory defaults are set to 1000 ppm and 1500 ppm.

ABC Logic Provides Automatic Calibration
Telaire’s Airestat 5000 line offers patented ABC Logic-software for self-correction of drift to better than ±20ppm per year. The system is virtually free of maintenance and typically has a lifetime of more than 10 years.

ABC Logic will not work properly, however, in applications where the space is unoccupied for less than four hours a day or where there are other internal sources of CO2in the building such as in breweries, wineries, greenhouses or occupational health settings.

VLI (Visual Limit Indicator)
The t5000 introduces an exciting new alternative to traditional scientific LCD display of the CO2value. Our new T5000 Series transmitter with VLI (Visual Level Indicator) communicates intuitively to the average end-user. The correlation between a CO2PPM reading and adequate ventilation may not be fully understood. Instead of offering the user a reading in ppm (parts per million), we provide a simple LED that communicates increased CO2concentrations based on definable or predetermined thresholds. The LED smoothly transitions between green, yellow and red as the CO2threshold is exceeded. Unlike scientific displays, training to understand ppm values is not a prerequisite with this innovative product.

Features		Description
Sampling Method		Non-dispersive infrared (NDIR), gold plated optics, (with Telaire’s patented ABC Logic self calibration algorithm). Diffusion sampling.
Measurement Range		0 to 2,000 ppm factory calibrated. Output scalable using UIP up to 3,000 ppm with resulting decrease in sensor accuracy
Accuracy		± 75 ppm @ 72°F (22°C) when compared with a factory reference or 10% of reading, whichever is greater
		Designed to be utilized in applications where concentrations will drop to outside ambient conditions (approximately 400 ppm) at least four times in a 14-day period, typically during unoccupied periods.
Temperature Dependence		0.2% FS per °F (°C)
Stability		<2% of FS over life of sensor (15 years typical)
Non-Linearity		<1% of FS
Pressure Dependence		0.13% of reading per mm Hg
Response Time		3 to 5 minutes for 90% step change
Warm Up time	Operational	Less then 2 minutes
	Max. Accuracy	10 Minutes
Conditions	Operating	32°F to 122°F (0°C to 50°C)
		0 to 95% RH, non condensing
	Storage	-4°F to 158°F (-20°C to 70°C)
		0 to 95% RH, non condensing
Temperature		NTC 20k Thermistor
Output	Analog	0 to 10V (100 Ωoutput impedance)
	Digital	RS-232 (TTL Level) communication with Telaire UIP software
Connections		Screw terminals for 18 to 28 AWG
Power	Requirement	18 to 30 VAC RMS, 50/60Hz or 18 to 42 VDC, polarity protected
	Consumption	1.75 VA average, 2.75 VA peak
Certifications		FCC Part 15 Class B, CE, RoHS, WEEE

Ordering Information
Model	Description	Buy Online	Price
5001	Telaire 5001 Airestat CO2 Temperature Transmitter, No LED		$279.13
5003	Telaire 5003 Airestat CO2 Temperature Transmitter, No LED, GE Logo		$279.13
5005	Telaire 5005 Airestat CO2 Temperature Transmitter, LED screen		$289.43
5007	Telaire 5007 Airestat CO2 Temperature Transmitter, LED screen, GE logo		$289.43