| Model |
Description |
Buy Online |
Price |
| AM300 |
Rohde & Schwarz AM300 2 channel functions-/ arbitrary waveform generator, clock rate max. 100 MHz, 256 kB memory (SKU 1147.1998.03 ) |
 |
$8,920.00 |
| CBT |
Rohde & Schwarz CBT Bluetooth tester with display, 4 HU, contains CBT-B55 (HW extension for EDR) |
|
$31,290.00 |
| CBT32 |
Rohde & Schwarz CBT32 Bluetooth tester without display 19", 2 HU, for remote control |
|
$22,460.00 |
| CBTB41 |
Rohde & Schwarz CBT-B41 HW-Option for CBT (4HU, with Display): Audio Generator and Analyzer |
|
$3,350.00 |
| CBTB55 |
Rohde & Schwarz CBT-B55 HW option for CBT/CBT32: EDR extension (ex factory only) CBT-K55 required |
|
$1,240.00 |
| CBTK54 |
Rohde & Schwarz CBT-K54 SW-Option for CBT/CBT32: Audio Profile Support Handsfree and Headset Profiles |
|
$3,360.00 |
| CBTK55 |
Rohde & Schwarz CBT-K55 SW option for CBT/CBT32: Enhanced Data Rate (EDR) CBT-B55/-U55 required |
|
$5,880.00 |
| CBTU55 |
Rohde & Schwarz CBT-U55 Upgrade kit for CBT/CBT32: EDR HW extension CBT-K55 required |
|
$2,530.00 |
| FS300 |
Rohde & Schwarz FS300 Spectrum Analyzer, 9 kHz to 3 GHz |
|
$7,210.00 |
| FS300K1 |
Rohde & Schwarz FS300-K1 PC Software |
|
$310.00 |
| FS315 |
Rohde & Schwarz FS315 Spectrum Analyzer, 9 kHz to 3 GHz with Tracking Generator |
|
$9,540.00 |
| FSH18 |
Rohde & Schwarz FSH18 Handheld Microwave Spectrum Analyzer, 10 MHz to 18 GHz |
|
$18,500.00 |
| FSH3 |
Rohde & Schwarz FSH3 3 GHz Handheld Spectrum Analyzer |
|
$8,200.00 |
| FSH313 |
Rohde & Schwarz FSH313 3 GHz Handheld Spectrum Analyzer with Tracking Generator |
|
$10,550.00 |
| FSH323 |
Rohde & Schwarz FSH323 3 GHZ Handheld Spectrum Analyzer with Tracking Generator, and Preamp |
|
$12,760.00 |
| FSH3TV |
Rohde & Schwarz FSH3-TV TV analyzer (SKU 2111.7005.63 ) |
|
$12,950.00 |
| FSH6 |
Rohde & Schwarz FSH6 6 GHz Handheld Spectrum Analyzer, with preamplifier |
|
$13,070.00 |
| FSH626 |
Rohde & Schwarz FSH626 6 GHz Handheld Spectrum Analyzer with tracking generator and preamp |
|
$16,470.00 |
| FSHB1 |
Rohde & Schwarz FSH-B1 Option Distance To Fault measurement including 1 m cable; for FSH313/323/626 and FSH3-TV only; needs FSH-Z2 or FSH-Z3; SKU 1145.5750.02 |
|
$1,260.00 |
| FSHK1 |
Rohde & Schwarz FSH-K1 Remote control to handheld spectrum analyzer FSH (via RS232) |
|
$400.00 |
| FSHK2 |
Rohde & Schwarz FSH-K2 Vector reflection and transmission measurement for FSH with tracking generator |
|
$950.00 |
| FSHK3 |
Rohde & Schwarz FSH-K3 Receiver mode |
|
$1,070.00 |
| FSHK4 |
Rohde & Schwarz FSH-K4 3GPP FDD Code Domain Power BTS/Node B Measurement for FSH3 Model 23 ONLY (SKU 1300.7633.02) |
|
$1,000.00 |
| FSHTVK21 |
Rohde & Schwarz FSHTV-K21 DVB-C/J.83/A,B,C (QAM) firmware for R&S FSH3-TV (SKU 2111.7211.02) |
|
$990.00 |
| FSHTVK22 |
Rohde & Schwarz FSHTV-K22 ATSC/8VSB firmware for R&S FSH3-TV (SKU 2111.7228.02) |
|
$1,410.00 |
| FSHTVZ60 |
Rohde & Schwarz FSHTV-Z60 Pre-selector for FSH3-TV (SKU 2111.7105.02) |
|
$1,690.00 |
| FSHTVZ61 |
Rohde & Schwarz FSHTV-Z61 Spare F adapter (female/female) for R&S FSH3-TV (SKU 2111.7111.02) |
|
$35.00 |
| FSHZ1 |
Rohde & Schwarz FSH-Z1 Power sensor for FSHx |
|
$2,830.00 |
| FSHZ14 |
Rohde & Schwarz FSH-Z14 Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female |
|
$4,020.00 |
| FSHZ18 |
Rohde & Schwarz FSH-Z18 Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW |
|
$4,310.00 |
| FSHZ2 |
Rohde & Schwarz FSH-Z2 VSWR Bridge & power divider 10 MHz to 3 GHz for FSHx |
|
$2,810.00 |
| FSHZ20 |
Rohde & Schwarz FSH-Z20 Spare RF Cable, 1 M, N Connector |
|
$400.00 |
| FSHZ21 |
Rohde & Schwarz FSH-Z21 12 V car adapter for FSHx |
|
$180.00 |
| FSHZ22 |
Rohde & Schwarz FSH-Z22 Serial/Parallel converter for FSHx |
|
$310.00 |
| FSHZ25 |
Rohde & Schwarz FSH-Z25 Soft carrying bag for FSH |
|
$240.00 |
| FSHZ26 |
Rohde & Schwarz FSH-Z26 Hard case for FSH |
|
$950.00 |
| FSHZ28 |
Rohde & Schwarz FSH-Z28 Spare load/open/short calibration standard for Z3 - DC to 6 GHz, N connector (SKU 1300.7804.02 ) |
|
$1,370.00 |
| FSHZ29 |
Rohde & Schwarz FSH-Z29 Spare load/open/short calibration standard to FSH N-connector (SKU 1300.7504.02) |
|
$820.00 |
| FSHZ3 |
Rohde & Schwarz FSH-Z3 VSWR bridge with DC bias and bypass switch 10 MHz -6 GHz, 50 Ohm, incl. open, short, load for calibration (SKU 1300.7756.02) |
|
$6,520.00 |
| FSHZ30 |
Rohde & Schwarz FSH-Z30 Spare Short Circuit for calibrating VSWR measurements |
|
$430.00 |
| FSHZ31 |
Rohde & Schwarz FSH-Z31 Spare 50 Ohm Load Standard |
|
$430.00 |
| FSHZ32 |
Rohde & Schwarz FSH-Z32 Spare battery pack for FSH |
|
$210.00 |
| FSHZ33 |
Rohde & Schwarz FSH-Z33 Spare AC Power supply for FSH |
|
$220.00 |
| FSHZ34 |
Rohde & Schwarz FSH-Z34 Spare R232 Optical interface cable for FSHx |
|
$250.00 |
| FSHZ35 |
Rohde & Schwarz FSH-Z35 Spare CD-ROM includes manual and FSH View |
|
$150.00 |
| FSHZ36 |
Rohde & Schwarz FSH-Z36 Spare Headphone for FSH |
|
$60.00 |
| FSHZ37 |
Rohde & Schwarz FSH-Z37 Optical USB interface cable, 1.5 m |
|
$330.00 |
| FSHZ38 |
Rohde & Schwarz FSH-Z38 75 ohm matching pad N to BNC (female) |
|
$510.00 |
| FSHZ44 |
Rohde & Schwarz FSH-Z44 Directional power sensor 200 MHz - 400 GHz, 3 mW -120(300)W |
|
$3,109.00 |
| FSL3 |
Rohde & Schwarz FSL3 Spectrum Analyzer 9 kHz - 3 GHz, -135 - +20 dBm, Bandwith 300 Hz to 3 MHz TFT color display |
|
$10,090.00 |
| FSL313 |
Rohde & Schwarz FSL313 Spectrum analyzer 9 kHz -3 GHz -135 -+20 dBm, RBW 300 Hz - 10 MHz incl. tracking gen. 1 MHz- 3 GHz |
|
$12,680.00 |
| FSL3DKD |
Rohde & Schwarz FSL3-DKD ISO17025 Calibration incl. ISO9000 calibration (order with device only) |
|
$1,090.00 |
| FSL6 |
Rohde & Schwarz FSL6 Spectrum analyzer 9 kHz -6 GHz -135 -+20 dBm, RBW 300 Hz - 10 MHz TFT color display |
|
$18,040.00 |
| FSL616 |
Rohde & Schwarz FSL616 Spectrum analyzer 9 kHz -6 GHz -135 -+20 dBm, RBW 300 Hz - 10 MHz incl. tracking gen. 1 MHz -6 GHz |
|
$17,000.00 |
| FSL6DKD |
Rohde & Schwarz FSL6-DKD ISO17025 calibration incl. ISO9000 (order only with device) |
|
$1,260.00 |
| FSLB10 |
Rohde & Schwarz FSL-B10 GPIB Interface |
|
$680.00 |
| FSLB22 |
Rohde & Schwarz FSL-B22 RF preamplifier gain 20 dB |
|
$1,280.00 |
| FSLB30 |
Rohde & Schwarz FSL-B30 DC power supply 12-28V |
|
$680.00 |
| FSLB31 |
Rohde & Schwarz FSL-B31 NiMH battery pack |
|
$1,130.00 |
| FSLB4 |
Rohde & Schwarz FSL-B4 OCXO reference frequency (SKU 1300.6008.02 ) |
|
$1,150.00 |
| FSLB5 |
Rohde & Schwarz FSL-B5 Additional interfaces video/IF-output, power meter 28 VDC for noise source |
|
$480.00 |
| FSLB6 |
Rohde & Schwarz FSL-B6 TV trigger (SKU 1300.5901.02) |
|
$480.00 |
| FSLB7 |
Rohde & Schwarz FSL-B7 Narrow resolution filters 10 Hz - 10 MHz |
|
$330.00 |
| FSLB8 |
Rohde & Schwarz FSL-B8 Gated sweep function |
|
$680.00 |
| FSLK20 |
Rohde & Schwarz FSL-K20 Cable TV Measurements (SKU 1301.9675.02) |
|
$2,630.00 |
| FSLK7 |
Rohde & Schwarz FSL-K7 Analogue demodulation AM/FM/PM (SKU 1301.9246.02) |
|
$2,090.00 |
| FSLK8 |
Rohde & Schwarz FSL-K8 Bluetooth TX Measurements, Basic Rate and EDR (SKU 1301.9398.02) |
|
$3,450.00 |
| FSLK9 |
Rohde & Schwarz FSL-K9 Power sensor measurements with NRP |
|
$680.00 |
| FSLK14 |
Rhode & Schwarz FSL-K14, Spectrogram Measurements |
|
$1,310.00 |
| FSLK30 |
Rhode & Schwarz FSL-K30, Noise Figure and Gain Measurements, Application Firmware (Requires FSL-B5, Preamplifier, and Noise Source) |
|
$5,290.00 |
| FSLK72 |
Rhode & Schwarz FSL-K72, 3GPP FDD BTS Application Firmware |
|
$4,870.00 |
| FSLK91 |
Rohde & Schwarz FSL-K91 WLAN TX Measurement (SKU 1302.0094.02) |
|
$8,310.00 |
|
FSLK93 |
Rohde & Schwarz FSL-K93 Application Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL |
|
$9,580.00 |
| FSLZ3 |
Rohde & Schwarz FSL-Z3 Soft carrying bag for R&S FSL series |
|
$6,520.00 |
| FSLZ4 |
Rohde & Schwarz FSL-Z4 Additional charger unit for FSL-B31 |
|
$230.00 |
| HE200 |
Rohde & Schwarz HE200 Active directional antenna 20 - 3000 MHz; 3 ranges (SKU 4050.3509.02) |
|
$6,740.00 |
| HE500 |
Rohde & Schwarz HE500 Active receiving antenna 20 - 3000 MHz; N female (SKU 4059.2005.02) |
|
$7,520.00 |
| HZ15ROHDE |
Rohde & Schwarz HZ-15 Probe set for E and H nearfield emissions |
|
$2,430.00 |
| HZ16ROHDE |
Rohde & Schwarz HZ-16 Preamplifier 3 GHz, 20 dB, powersupply 100 - 230 V for probe HZ-15 |
|
$650.00 |
| NAS |
Rohde & Schwarz NAS Directional Power Meter Display Unit |
|
$1,290.00 |
| NASZ1 |
Rohde & Schwarz NAS-Z1 Insertion unit 50 ohm, 1 - 30 MHz, 0.01 -100 W connection: N female |
|
$1,210.00 |
| NASZ10 |
Rohde & Schwarz NAS-Z10 Carrying bag for NAS |
|
$210.00 |
| NASZ2 |
Rohde & Schwarz NAS-Z2 Insertion unit 50 ohm, 1 - 30 MHz, 0.1 -1000 W connection: N female |
|
$1,440.00 |
| NASZ3 |
Rohde & Schwarz NAS-Z3 Insertion unit 50 ohm, 25 - 200 MHz, 0.1 -1000 W connection: N female |
|
$1,130.00 |
| NASZ5 |
Rohde & Schwarz NAS-Z5 Insertion unit 50 ohm, 70 - 1000 MHz, 0.1 -1000 W connection: N female |
|
$1,170.00 |
| NASZ6 |
Rohde & Schwarz NAS-Z6 Insertion unit 50 ohm, 0.01 -100 W connection: N female |
|
$1,450.00 |
| NASZ7 |
Rohde & Schwarz NAS-Z7 Insertion unit 50 ohm, for DCS1800/1900/GSM, 10 mW - 30 W connection: N female |
|
$1,500.00 |
| NASZ9 |
Rohde & Schwarz NAS-Z9 Cable (1.5m) for Nas insertion unit |
|
$90.00 |
| NRP |
Rohde & Schwarz NRP Power Meter Display and Control Unit |
|
$4,020.00 |
| NRPB1 |
Rohde & Schwarz NRP-B1 Sensor Check Source Option |
|
$540.00 |
| NRPB2 |
Rohde & Schwarz NRP-B2 Second sensor input (B) (factory fitted option only) |
|
$2,830.00 |
| NRPB3 |
Rohde & Schwarz NRP-B3 Battery supply with built-in charger and NiMH battery Option |
|
$830.00 |
| NRPB4 |
Rohde & Schwarz NRP-B4 Ethernet LAN interface 10/100 Base-T Option |
|
$670.00 |
| NRPB5 |
Rohde & Schwarz NRP-B5 3rd and 4th sensor input (C,D) (option B2 needed) |
|
$2,020.00 |
| NRPB6 |
Rohde & Schwarz NRP-B6 Rear-panel sensor inputs A and B. Option (not in conjunction with NRP-B5) |
|
$80.00 |
| NRPZ11 |
Rohde & Schwarz NRP-Z11 Average power sensor for universal use 10 MHz - 8 GHz, 200 pW - 200 mW |
|
$3,080.00 |
| NRPZ205 |
Rohde & Schwarz NRP-Z2 Sensor extension cable to 5 meters (SKU 1146.6750.05) |
|
$210.00 |
| NRPZ210 |
Rohde & Schwarz NRP-Z2 Sensor extension cable to 10 meters (SKU 1146.6750.10) |
|
$320.00 |
| NRPZ21 |
Rohde & Schwarz NRP-Z21 Average power sensor for universal use 10 MHz - 18 GHz, 200 pW 200 mW |
|
$3,750.00 |
| NRPZ22 |
Rohde & Schwarz NRP-Z22 Average power sensor 10 MHz - 18 GHz, 2 nW - 2 W for universal use |
|
$3,970.00 |
| NRPZ23 |
Rohde & Schwarz NRP-Z23 Average power sensor 10 MHz -18 GHz, 20 nW - 15 W for universal use |
|
$4,340.00 |
| NRPZ24 |
Rohde & Schwarz NRP-Z24 Average power sensor 10 MHz - 18 GHz, 60 nW - 30 W for universal use |
|
$4,690.00 |
| NRPZ3 |
Rohde & Schwarz NRP-Z3 USB adapter (active) for NRP-Z sensors, including trigger output and AC supply |
|
$1,050.00 |
| NRPZ4 |
Rohde & Schwarz NRP-Z4 USB adapter (passive) for NRP-Z sensors powered via USB |
|
$290.00 |
| NRPZ51 |
Rohde & Schwarz NRP-Z51 Thermal power sensor 0 - 18 GHz, 1 mu W - 100 mW |
|
$2,560.00 |
| NRPZ55 |
Rohde & Schwarz NRP-Z55 Thermal power sensor 0 - 40 GHz, 1 mu W - 100 mW |
|
$3,930.00 |
| NRPZ91 |
Rohde & Schwarz NRP-Z91 Average power sensor 9 kHz - GHz, 200 pW - 200 mW |
|
$3,600.00 |
| NRT |
Rohde & Schwarz NRT Power Reflection Meter |
|
$3,470.00 |
| NRTB1 |
Rohde & Schwarz NRT-B1 Interface for NAP-Z power sensors Option |
|
$740.00 |
| NRTB2 |
Rohde & Schwarz NRT-B2 Two rear inputs for NRT-Z power sensors Option |
|
$450.00 |
| NRTB3 |
Rohde & Schwarz NRT-B3 Battery Supply with built-in charger and NiMH accumulator Option |
|
$610.00 |
| NRTZ1 |
Rohde & Schwarz NRT-Z1 NiMH accumulator |
|
$260.00 |
| NRTZ14 |
Rohde & Schwarz NRT-Z14 Directional power sensor 25 MHz - 1 GHz mW - 120(300) W, N-female |
|
$3,410.00 |
| NRTZ210 |
Rohde & Schwarz NRT-Z210 10 meters extension cable for NRT-Z power sensors |
|
$430.00 |
| NRTZ230 |
Rohde & Schwarz NRT-Z230 30 Meter extension cable for NRT-Z power sensors |
|
$740.00 |
| NRTZ3 |
Rohde & Schwarz NRT-Z3 RS232 interface adapter for NRT-Z power sensors Including AC power supply |
|
$740.00 |
| NRTZ4 |
Rohde & Schwarz NRT-Z4 PCMCIA interface adapter for NRT-Z sensors |
|
$860.00 |
| NRTZ43 |
Rohde & Schwarz NRT-Z43 Directional power sensor 0.4 - 4 GHz, 7 mW - 30(75) W N- Female |
|
$2,790.00 |
| NRTZ44 |
Rohde & Schwarz NRT-Z44 Directional power sensor 200 MHz - 4 GHz, N female |
|
$2,790.00 |
| NRVD |
Rohde & Schwarz NRVD Dual Channel power meter display unit, IEEE bus, digital /analog display |
|
$6,340.00 |
| NRVDB2 |
Rohde & Schwarz NRVD-B2 Analog output, trigger input sweep frequency input input/output Option for NRVD |
|
$840.00 |
| NRVDDKD |
Rohde & Schwarz NRVD-DKD ISO17025 calibration incl. ISO 9000 calibration (order only with device) |
|
$620.00 |
| NRVDS1 |
Rohde & Schwarz NRVD-S1 Service kit for NRVD |
|
$1,060.00 |
| NRVS |
Rohde & Schwarz NRVS Single Channel Power Meter |
|
$3,380.00 |
| NRVSB1 |
Rohde & Schwarz NRVS-B1 Option: Sensor check source 1 mW 50 MHz for NRVS, URV35 and URV55 (SKU 1029.2908.02) |
|
$580.00 |
| NRVSS1 |
Rohde & Schwarz NRVS-S1 Service kit for NRVS |
|
$990.00 |
| NRVZ1 |
Rohde & Schwarz NRV-Z1 Power sensor 50 Ohm 10 MHz - 18 GHz, 200 pW - 20 mW N-connector male, 1.3m (4 ft) cable |
|
$1,970.00 |
| NRVZ102 |
Rohde & Schwarz NRV-Z1-02 Power sensor 50 Ohm 10 MHz - 18 GHz, 200 pW - 20 mW N-connector male, 1.3 m (4 ft) cable |
|
$1,970.00 |
| NRVZ103 |
Rohde & Schwarz NRV-Z1-03 Power sensor 50 Ohm 10 MHz - 18 GHz, 200 pW - 20 mW N-connector male, 5 m (16 ft) cable |
Discontinued |
| NRVZ15 |
Rohde & Schwarz NRV-Z15 Power sensor 50 Ohm 50 MHz - 40 GHz, 400 pW - 20 mW K(2.92 mm) male, 1.3 m (4 ft) cable |
|
$3,010.00 |
| NRVZ202 |
Rohde & Schwarz NRV-Z2-02 Power sensor 50 Ohm 10 MHz - 18 GHz, 20 nW - 500 mW N-connector male, 1.3 m (4 ft) cable |
|
$2,130.00 |
| NRVZ203 |
Rohde & Schwarz NRV-Z2-03 Power sensor 50 Ohm 10 MHz - 18 GHz, 20 nW - 500 mW N-connector male, 5 m (16 ft) cable |
|
$2,360.00 |
| NRVZ302 |
Rohde & Schwarz NRV-Z3-02 Power sensor 75 Ohm 1 MHz - 2.5 GHz, 100 pW - 13 mW N-connector male, 1.3 m (4 ft) cable |
Discontinued |
| NRVZ303 |
Rohde & Schwarz NRV-Z3-03 Power sensor 75 Ohm 1 MHz - 2.5 GHz, 100 pW - 13 mW N-connector male, 5 m (16 ft) cable |
Discontinued |
| NRVZ3102 |
Rohde & Schwarz NRV-Z31-02 Peak power sensor 50 Ohm 30 MHz - 6 GHz, standard model 1 µW - 20 mW |
|
$2,380.00 |
| NRVZ3103 |
Rohde & Schwarz NRV-Z31-03 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 µW - 20 mW high speed model |
|
$2,380.00 |
| NRVZ3104 |
Rohde & Schwarz NRV-Z31-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, TDMA model 1 µW - 20 mW |
|
$2,380.00 |
| NRVZ3204 |
Rohde & Schwarz NRV-Z32-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 100 µW - 2 W TDMA model |
|
$2,770.00 |
| NRVZ3205 |
Rohde & Schwarz NRV-Z32-05 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 100 µW - 2 W universal model |
|
$2,600.00 |
| NRVZ3303 |
Rohde & Schwarz NRV-Z33-03 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 mW - 20 W high speed model |
|
$3,040.00 |
| NRVZ3304 |
Rohde & Schwarz NRV-Z33-04 Peak power sensor 50 Ohm 30 MHz - 6 GHz, 1 mW - 20 W TDMA model |
|
$3,000.00 |
| NRVZ402 |
Rohde & Schwarz NRV-Z4-02 Power sensor 50 Ohm 100 kHz - 6 GHz, 100 pW - 20 mW N-connector male, 1.3 m (4 ft) cable |
|
$1,710.00 |
| NRVZ403 |
Rohde & Schwarz NRV-Z4-03 Power sensor 50 Ohm 100 kHz - 6 GHz, 100 pW - 20 mW N-connector male, 5 m (16 ft) cable |
|
$1,900.00 |
| NRVZ502 |
Rohde & Schwarz NRV-Z5-02 Power sensor 50 Ohm 100 kHz - 6 GHz, 10 nW - 500 mW N-connector male, 1.3 m (4 ft) cable |
|
$2,210.00 |
| NRVZ503 |
Rohde & Schwarz NRV-Z5-03 Power sensor 50 Ohm 100 kHz - 6 GHz, 10 nW - 500 mW N-connector male, 5 m (16 ft) cable |
|
$2,500.00 |
| NRVZ5102 |
Rohde & Schwarz NRV-Z51-02 Thermal power sensor 50 Ohm 0 - 18 GHz, 1 µW - 100 mW N-connector male, 1.3 m (4 ft) cable |
|
$1,760.00 |
| NRVZ5104 |
Rohde & Schwarz NRV-Z51-04 Thermal power sensor 50 Ohm 0 - 18 GHz, 1 µW - 100 mW N-connector male, thermal isolated |
|
$2,210.00 |
| NRVZ52 |
Rohde & Schwarz NRV-Z52 Thermal power sensor 50 Ohm 0 - 26.5 GHz, 1 µW - 100 mW 3.5 mm male, 1.3 m (4 ft) cable |
|
$2,130.00 |
| NRVZ53 |
Rohde & Schwarz NRV-Z53 Thermal power sensor 50 Ohm 0 - 18 GHz, N-connector 100 µW - 10 W |
|
$2,770.00 |
| NRVZ54 |
Rohde & Schwarz NRV-Z54 Thermal power sensor 50 Ohm 0 - 18 GHz, N-connector 300 µW - 30 W |
|
$2,990.00 |
| NRVZ55 |
Rohde & Schwarz NRV-Z55 Thermal power sensor 50 Ohm 0 - 40 GHz, 1 µW - 100 mW K (2.92 mm) male, 1.3 m cable |
|
$2,610.00 |
| NRVZ6 |
Rohde & Schwarz NRV-Z6 Power sensor 50 Ohm 50 MHz - 26.5 GHz, 400 pW - 20 mW PC 3.5 mm male, 1.3 m (4 ft) cable |
|
$2,360.00 |
| RAZ |
Rohde & Schwarz RAZ Matching pad 50/75 0 Ohm, 0 MHz to 2700 MHz |
|
$860.00 |
| SM300 |
Rohde & Schwarz SM300 Vector signal generator 9 kHz - 3 GHz vector modulation/AM/FM/PM |
|
$8,810.00 |
| SMA100A |
Rohde & Schwarz SMA100A Signal generator base unit. Requires frequency option |
|
$3,260.00 |
| SMAB103 |
Rohde & Schwarz SMA-B103 Option: Frequency range 9kHz to 3GHz with electronic attenuator. (factory fit) |
|
$15,470.00 |
| SMAB103L |
Rohde & Schwarz SMA-B103L Option: Frequency range 9kHz to 3GHz without attenuator (factory fit) |
|
$13,520.00 |
| SMAB106 |
Rohde & Schwarz SMA-B106 Option: Frequency range 9kHz to 6GHz with electronic attenuator. (factory fit) |
|
$20,670.00 |
| SMAB106L |
Rohde & Schwarz SMA-B106L Option: Frequency range 9kHz to 6GHz without attenuator (factory fit) |
|
$18,710.00 |
| SMAB20 |
Rohde & Schwarz SMA-B20 Option: FM/PHIM modulator. SMA-B10x required (factory fit) |
|
$1,960.00 |
| SMAB22 |
Rohde & Schwarz SMA-B22 Option: Enhanced phase noise performance and FM/PHIM modulator. SMAB10x required (factory fit) |
|
$7,810.00 |
| SMAB29 |
Rohde & Schwarz SMA-B29 Option: Clock Synthesizer |
|
$4,950.00 |
| SMAB80 |
Rohde & Schwarz SMA-B80 Option: Removable memory |
|
$340.00 |
| SMAB81 |
Rohde & Schwarz SMA-B81 Option: Rear panel connectors |
|
$410.00 |
| SMAK23 |
Rohde & Schwarz SMA-K23 Option: High performance Pulse generator |
|
$1,630.00 |
| SMAK24 |
Rohde & Schwarz SMA-K24 Option: Multifunction Generator |
|
$1,960.00 |
| SMAK25 |
Rohde & Schwarz SMA-K25 Option: VOR/ILS |
|
$2,290.00 |
| SMAZ20 |
Rohde & Schwarz SMA-Z20 Option: Assembled Rack Mount Kit |
|
$170.00 |
| SMB100A |
Rohde & Schwarz SMB100A Analog Signal generator base unit. (Requires frequency option |
| $1,810.00 |
| SMBB101 |
Rohde & Schwarz SMB-B101 Option: Frequency range 9kHz to 1.1GHz with electronic attenuator. (factory fit) |
|
$4,740.00 |
| SMBB102 |
Rohde & Schwarz SMB-B102 Option: Frequency range 9kHz to 2.2GHz with electronic attenuator. (factory fit) |
|
$5,980.00 |
| SMBB103 |
Rohde & Schwarz SMB-B103 Option: Frequency range 9kHz to 3.3GHz with electronic attenuator. (factory fit) |
|
$6,600.00 |
| SMBB106 |
Rohde & Schwarz SMB-B106 Option: Frequency range 9kHz to 6.6GHz with electronic attenuator. (factory fit) |
|
$13,910.00 |
| SMBB1 |
Rohde & Schwarz SMB-B1 OCXO Reference Oscillator |
|
$1,340.00 |
| SMBK22 |
Rohde & Schwarz SMB-K22 Pulse Modulator |
|
$830.00 |
| SMBK23 |
Rohde & Schwarz SMB-K23 High performance Pulse generator |
|
$620.00 |
| SML01 |
Rohde & Schwarz SML01 Signal generator 9 kHz - 1.1 GHz, AM/FM/PHIM |
|
$6,910.00 |
| SML01DKD |
Rohde & Schwarz SML01-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$1,090.00 |
| SML02 |
Rohde & Schwarz SML02 Signal generator 9 kHz - 2.2 GHz, AM/FM/PHIM |
|
$8,550.00 |
| SML02DKD |
Rohde & Schwarz SML02-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$1,120.00 |
| SML03 |
Rohde & Schwarz SML03 Signal generator 9 kHz - 3.3 GHz, AM/FM/PHIM |
|
$9,480.00 |
| SML03DKD |
Rohde & Schwarz SML03-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$1,160.00 |
| SMLB1 |
Rohde & Schwarz SML-B1 Option: Reference oscillator OXCO for SML |
|
$1,240.00 |
| SMLB19 |
Rohde & Schwarz SML-B19 Option: Rear panel connections for SML |
|
$300.00 |
| SMLB3 |
Rohde & Schwarz SML-B3 Option: Pulse modulator up to 3.3 GHz for SML (factory installation only) |
|
$940.00 |
| SMLB5 |
Rohde & Schwarz SML-B5 Stereo/RDS-coder for SML/SMV03 (factory installation only) |
|
$4,430.00 |
| SMLZ2 |
Rohde & Schwarz SML-Z2 Service kit for SML |
|
$680.00 |
| SMV03 |
Rohde & Schwarz SMV03 Vector signal generator 9 kHz - 3.3 GHz vector modulation/AM/FM/PHIM |
|
$16,360.00 |
| SMV03DKD |
Rohde & Schwarz SMV03-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$1,360.00 |
| TSEMF |
Rohde & Schwarz TS-EMF Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH (SKU 1158.9295.13) |
|
$13,980.00 |
| UP300 |
Rohde & Schwarz UP300 Audio Analyzer 10 Hz to 80 kHz Analog Interfaces (SKU 1147.2494.03 ) |
|
$7,970.00 |
| UP350 |
Rohde & Schwarz UP350 Audio Analyser 10Hz to 80KHz Analog and digital interfaces (SKU 1147.2507.03 ) |
|
$9,550.00 |
| URE2 |
Rohde & Schwarz URE2 RMS voltmeter DC - 25 MHz IEEE bus, digital readout, scaleable analog readout |
|
$5,280.00 |
| URE2DKD |
Rohde & Schwarz URE2-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$780.00 |
| URE3 |
Rohde & Schwarz URE3 RMS peak voltmeter DC - 30 MHz IEEE bus, 30 measurements/s, digital and scaleable analog readout |
|
$6,740.00 |
| URE3B2 |
Rohde & Schwarz URE3-B2 Input/output-option for URE3 trigger input + analog outputs and scaleable analog readout |
|
$850.00 |
| URE3DKD |
Rohde & Schwarz URE3-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$970.00 |
| URV3502 |
Rohde & Schwarz URV35-02 RF level meter display unit digital/analog display battery powered |
|
$3,390.00 |
| URV3503 |
Rohde & Schwarz URV35-03 RF level meter display unit digital/analog display mains powered |
|
$3,510.00 |
| URV35DKD |
Rohde & Schwarz URV35-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$490.00 |
| URV35S1 |
Rohde & Schwarz URV35-S1 Service kit for URV35 |
|
$1,060.00 |
| URV5 |
Rohde & Schwarz URV5 RF DC millivoltmeter - 26.5 GHz, IEEE bus digital readout, 2 inputs (SKU 0394.8010.02) |
|
$6,845.00 |
| URV55 |
Rohde & Schwarz URV55 RF-millivoltmeter analog/digital display IEC bus |
|
$3,640.00 |
| URV55DKD |
Rohde & Schwarz URV55-DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
|
$490.00 |
| URV5DKD |
Rohde & Schwarz URV5-DKD URV5 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) (SKU 1161.3220.02) |
|
$375.00 |
| URV5Z1 |
Rohde & Schwarz URV5-Z1 DC-probe range 0 - 400 V input impedance 9 mOhm\\6 pF |
|
$490.00 |
| URV5Z202 |
Rohde & Schwarz URV5-Z2-02 10 V insertion unit, 50 Ohm, 9 kHz - 3 GHz, 200 µV - 10 V, N-male/female, 1.3 m cable |
|
$1,410.00 |
| URV5Z205 |
Rohde & Schwarz URV5-Z2-05 10 V insertion unit, 50 Ohm, 9 kHz - 3 GHz, 200 µV - 10 V, N-male/female, 5 m cable |
|
$1,690.00 |
| URV5Z402 |
Rohde & Schwarz URV5-Z4-02 100 V insertion unit, 50 Ohm, 100 kHz - 3 GHz, 2 mV - 100 V, N-male/female, 1.3 m cable |
|
$1,560.00 |
| URV5Z405 |
Rohde & Schwarz URV5-Z4-05 100 V insertion unit, 50 Ohm, 100 kHz - 3 GHz, 2 mV - 100 V, N-male/female, 5 m cable |
|
$1,760.00 |
| URV5Z702 |
Rohde & Schwarz URV5-Z7-02 RF probe in a case 20 kHz - 1 GHz 200 µV - 10V, with accessory |
|
$1,620.00 |
| URV5Z703 |
Rohde & Schwarz URV5-Z7-03 RF-probe in a case, 5 m cable 20 kHz - 1 GHz, 200 µV - 10 V with accessory |
|
$1,560.00 |
| ZVL3 |
Rohde & Schwarz ZVL3 Vector network analyzer, 2 ports, 9 kHz -3 GHz |
|
$19,900.00 |
| ZVL6 |
Rohde & Schwarz ZVL6 Vector network analyzer, 2 ports, 9 kHz -6 GHz |
|
$26,450.00 |
| ZVLK1 |
Rohde & Schwarz ZVL-K1 Spectrum analysis function for ZVL3 and ZVL6 |
|
$7,100.00 |
| ZZA211 |
Rohde & Schwarz ZZA-211 19" adapter, 2 HU, 1/1 for BW2000 cabinets |
|
$180.00 |
| ZZA300 |
Rohde & Schwarz ZZA-300 Rackmount Kit |
|
$310.00 |
| ZZA97 |
Rohde & Schwarz ZZA-97 19" adapter 2 HU, 1/2 for KB 90 cabinets, for 1 or 2 units 350 mm depth / NRVS, URV35/55 |
|
$500.00 |
| ZZA98 |
Rohde & Schwarz ZZA-98 19" adapter 2 HU/3 HU, ½ wide, for KB90 cabinets, 2 HU and 3 HU combinable, 350 mm depth/ NRVD |
Discontinued |
| ZZAS234 |
Rohde & Schwarz ZZA-S234 19" Rack
Adapter |
Please Call |
| ZZAS334 |
Rohde & Schwarz ZZA-S334 Adapter for BW2000 3HU 3/4 cabinet with impact protection |
|
$470.00 |
| ZZAT26 |
Rohde & Schwarz ZZA-T26 19" adapter 1/2 type 26 |
|
$570.00 |
| ZZAT27 |
Rohde & Schwarz ZZA-T27 19" adapter 1/2 type 27 |
|
$570.00 |
| ZZK300 |
Rohde & Schwarz ZZK-300 Carrying case for instruments of the UMT family |
|
$610.00 |
