|
<< Protek LCR Meters
Protek Z8200
Bench LCR Meter
|
- Measures L, C, R, |Z|, Q and D
- Displays component value, Q or D, Delta, or Delta%
- 5 digit display for component value and Q/D
- Auto ranging or Range hold
- Built-in comparator with 4 bin-sorting function
- Open and short circuit calibration for accurate zeroing
- Series and parallel equivalent circuit modes
- Three test frequencies
- Warning alarm for pass or fail binning
|
 
|
|
|
|
Measured Components |
|
Abbreviations Used |
L (inductance)
C (capacitance)
R (resistance)
Z (Impedance) |
| Circuit
Configuration |
Series and Parallel |
| Parameters
Displayed |
Measured values, absolute Delta and Delta % |
|
Resistance/Impedance |
|
Measured Parameter |
R + Q and |Z| |
| Measurement
Range |
R: 1mW to 999.99mW
Q: 0.0001 to 99999 |
|
Inductance |
|
Measured Parameter |
L + Q |
| Measurement
Range |
L: 1µH to 999.99H (100Hz & 120Hz)
L: 0.1µH to 999.99 (1KHz)
Q: 0.0001 to 99999 |
|
Capacitance |
|
Measured Parameter |
C + D |
| Measurement
Range |
C: 1pF to 999.99µF
D: 0.0001 to 99999 |
|
Test Environment |
|
Test Frequency |
100Hz, 120Hz, 1KHz |
| Test Voltage |
0.3V RMS |
|
Drive Voltage Accuracy |
±10% |
| Measurement Rate |
2 Measurements/Sec |
|
Ranging |
Auto or Hold |
|
Measurement Accuracy |
|
Basic Accuracy |
±0.3% @ 23°C ±5°C
(See user manual for detailed accuracy conditions) |
| Zero Input Correction |
Open and short circuit |
|
General Specifications |
|
Power Requirement |
AC Voltage Input: 120/220V |
| Frequency |
50/60Hz |
| Power Consumption |
10W (Max) |
|
Operating Temperature |
0 to 40°C at £ 85% Relative
Humidity |
| Size |
4.3" H x 10.6" W x 10.2" D |
|
Weight |
5.5 lbs |
| Supplied Accessories |
Manual, Line cord, Test leads with Kelvin clips |
|
|
|
|
Ordering Information |
| Model |
Description |
Buy Online |
Price |
| Z8200 |
Protek Z8200 Bench LCR Meter |
 |
$669.00 |
|
Included Accessories |
| |
- (1) Power Cord
- (1) Test Leads with Kelvin Clips
- (1) Instruction Manual
|
Included |
|
)
