Protek B8003FD
3 MHz Dual Output DDS Function Generator

Built with highly stable and reliable Direct Digital Synthesis [DOS] technology
The B8000FD series of Function Generators consist of 4 models with Frequency ranges from 1µHz to 3MHz(B8003FD)/10MHz(B801DFD/20MHz(B8020FD)/40MHz(B8040FD)
Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and noise waveforms
All models have a Dual output with a second 0.1Hz to 20KHz output with all internal waveforms available
AM [int/ext], FM [int], FSK, ASK, PSK and Burst
Linear & logarithmic sweep
Excellent long and short term frequency stability
RS232 interface
Built in 100MHz Frequency counter
Convenient keyboard entry of all waveform parameters

Protek B8003FD shown

Product Information
Datasheet	180 KB
Specifications	HTML
Ordering Info
PDF Help

Specifications
Waveforms		Sine, Square, Triangle, Ramp Noise, Sin (X)/x, Exp Up, Exp down and Pulse
Frequency Range	Sine	1µHz to 3MHz
	Square	1µHz to 3MHz 1µHz to 1MHz(All other waveforms)
	Ramp and Triangle	1µHz to 1MHz
	Stability	Long term 50ppm, Short term: 1ppm
	Resolution	0.1µHz or 8 digits
	Accuracy	0.4Hz(>3.1KHz) .1µHz(<100mHz)
Waveform Characteristics
Sine wave	Harmonic Distortion	<20KHz: -54dBc(0.20%) 20 KHz to 1MHz: -48dBC (0.4%) 1 MHz to 10MHz: -40dBc(1.0%) 10MHz to 20MHz: -22dBc(2.5%)
Square Wave	Rise/Fall Time	<10nS (1Volt p-p in to 50W)
	Asymmetry	<1%+20nS
	Pulse: Duty Cycle	0.1% to 99.9% (<10KHz) 1% to 99%(<100KHz) 3% to 97% (<1MHz)
	Duty Cycle Rise/Fall time	<15nS
Ramp and Triangle	Linearity	<0.1% (1KHz)
Outputs
Main Outputs	Output Impedance	50W
	Amplitude: Open circuit	2mV to 20V p-p (≤ 20MHz) 2mV to 6V p-p (40MHz)
	Amplitude: 50W load	1mV to 10V p-p (≤20MHz) 1mV to 3V p-p (40MHz)
	Resolution	8 Bits
	Amplitude Flatness	5%
	DC Offset Range	-100% to +100% of Peak Value
Outputs B	Waveforms	All internal waveforms
	Amplitude	200mV to 20V p-p
	Frequency Range	0.1Hz to 20KHz
	Output Impedance	600W
Sync output		Active for all wave forms and functions except Sine and Square waves
Sync output	Output Level	TTL
Sweep	Sweep Modes	Lin and Log
	Sweep width	From 1Hz o max waveform freq.
	Sweep Speed	10mS to 10S
	Sweep Trigger	Internal, External, and Single
FSK, PSK, ASK Modulation	Carrier	All internal waveforms
	Internal Rate	9mHz to 50KHz
	Frequency Range	11Hz to the maximum frequency
Burst	Waveforms	All internal waveforms
	Number of cycles	1 to 65,535
	Frequency Range	-360º to + 360º
Amplitude Modulation [Internal]	Modulation depth	0 to 100%
	Carrier Frequency	1Hz to the maximum waveform frequency
	Carrier Waveforms	Internal waveforms; Except Square wave
	Modulation Waveforms	Internal waveforms
	Modulation Frequency	10mHz to 20KHz
External Amplitude Modulation	Input Impedance	100KW
External Amplitude Modulation	Modulation depth	a 0.4V p-p signal would 100% modulate a 1V p-p Sine wave
Frequency Modulation	Carrier Waveforms	All internal waveforms
	Carrier Frequency	1.0Hz to the maximum waveform frequency
	Modulation Waveforms	All internal waveforms
	Modulation Frequency	100mHz to 10KHz
	Deviation	0.1Hz to the maximum waveform frequency
Phase Modulation	Carrier Waveforms	Sine, Square
	Carrier Frequency Sine wave	1µHz to the maximum Sine wave frequency
	Carrier Frequency Square Wave	1Hz to the maximum Square wave frequency
	Modulation Waveforms	600W
	Modulation Frequency	100mHz to 10KHz
	Maximum Phase Shift	360º
Frequency Counter	Frequency Range	1Hz to 100MHz
	Input Signal Sensitivty	> 100mV
	Interface	RS232
	Baud Rate	9600
	Parity	None
	Data bits	8
	Stop bits	1
General Specifications	Input Voltage	110V and 220V selectable
	Input Power	18 watts
	Dimensions	5.6"(W) x 3.0"(H) x 10.5"(D)
	Weight	4.34 lbs
	Accessories	Operating manual, BNC cable w/ Alligator clips and AC power cord

Ordering Information
Model	Description	Buy Online	Price
B8003FD	Protek B8003FD 3 MHz Dual Output DDS Function Generator		$387.00
Included Accessories
	1 - Power Cord 1 - Instruction Manual 1 - BNC Cable	Included

Protek B8003FD 3 MHz Dual Output DDS Function Generator

Protek B8003FD
3 MHz Dual Output DDS Function Generator