LEM Analyst 3P
Three-Phase Power Analyzer, Discontinued

See: Fluke 1735

The Analyst 3P is suitable for:

Product Information
Datasheet	95 KB
Manual	608 KB
PDF Help

Load studies on single and three phase loads

General voltage and current measurements and recording
Viewing voltage and current waveforms during commissioning of electrical equipment
Measuring and monitoring harmonic distortion caused by electronic loads
Monitoring of voltage events caused by load switching and faulty equipment
Generating reports on power system performance
Set up long-term recording in seconds for load studies.
Check for most common power quality issues with voltage event capture and harmonic analysis
Measure all three phases and neutral with included 4 flexible current probes
Compact, rugged form factor with IP65 protection, 600 V CAT III and 2-year warranty allows flexible use both in plant and in the field
Quick visualization with the oscilloscope function for voltage and current
Easily view trends and recorded data with popular included PQ LogView software
Generate quality reports with report generator and screen snapshot functions

LOGGING
Data can be stored as Saved Screens or logged values. All parameters shown on the screen are logged simultaneously. Stored readings can be recalled and displayed on-screen in normal screen format or in the case of logged data as a chart.

All saved data can be downloaded to a PC including waveforms for harmonics analysis using WinLog software. WinLog also allows direct logging to a PC of waveforms, harmonics and up to 5 measured parameters.

Memory Size
Analyst 2050: 8 Screens and up to 5000 readings Analyst 2060: 8 Screen Smart Save and up to 10000 readings.

Waveforms and Harmonics
The auto-ranging scope function has ranges from 10A to 2000A and 4V to 1000V for the display of current and voltage waveforms.

The time-base is selectable from 2ms/div to 50ms/div.

Refresh rate 0.5 seconds.

Max sampling rate 9.6 kHz

The Analyst 2060 allows the harmonic content of current and voltage waveforms to be displayed up to the 25th harmonic, in bargraph format, together with individual values and THD/DF. Fundamental frequency range F0 - 45Hz to 65Hz.

Software
WinLog is an easy to use PC software and interface package for data logging applications with the LEM Power Clamps and HEME ISO Series insulation testers. The software can be used to continually log the electrical measurement displayed on the instrument or to download stored data from the Analyst and ISO2000 to a PC for further analysis.

Easy to use Windows format allowing the display of multiple parameters in instrument mimic, table and chart formats.

Simultaneous logging of multiple parameters

Waveform and stored data download from the Analyst

Harmonics analysis of waveforms with the Analyst and LH1060 Simple data export to other applications

Ordering Information
Model	Description	Buy Online	Price
ANALYST3P	LEM ANALYST 3P US SH0624U, PQ ANALYZER INC 4 FLEX SET, US	Discontinued See: Fluke 1735

LEM Analyst 3P Three-Phase Power Analyzer, Discontinued

See: Fluke 1735

LEM Analyst 3P
Three-Phase Power Analyzer, Discontinued