Lascar EL-USB-TC
Thermocouple Data Logger with USB Interface

-200 to +1300°C Measurement Range (K-type)
-130 to +900°C Measurement Range (J-type)
-200 to +350°C Measurement Range (T-type)
USB Interface for Set-up and Data Download
2 User-Programmable Alarm Thresholds
Bright Red and Green LED Indication
Replaceable Internal Lithium Battery
Supplied with basic K-type thermocouple rated from 0 to 110°C (32 to 230°F)

Lascar EL-USB-TC Shown

Product Information
Datasheet	74 KB
PDF Help

The EL-USB-TC data logger measures and stores over 32,000 temperature readings from either a K, J or T type thermocouple. A thermocouple is attached via the thermocouple socket at the base of the unit. The user can easily set up the thermocouple type, logging rate, start-time, logging mode, and download the stored data by plugging the module straight into a PC's USB port and running the purpose designed software under Windows 2000, XP or Vista. Data can then be graphed, printed and exported to other applications. The data logger is supplied complete with a long-life lithium battery, which will last for approximately 6 months.

Easy to install and use, the control software runs under Windows 2000, XP (Home and Professional Editions) and Vista (32-bit). It allows the user to set up and download any EL-USB-TC.

Specifications	Min	Max	Unit	Typical
Probe Measurement range (K-type)	-200 (-328)	+1300 (2372)	°C(°F)
Probe Measurement range (J-type)	-130 (-202)	+900 (1652)	°C(°F)
Probe Measurement range (T-type)	-200 (-328)	+350 (662)	°C(°F)
Operating Temperature range	-10 (14)	+40 (104)	°C(°F)
Resolution (internal and displayed)			°C(°F)	0.5 (1)
Accuracy (logger error)			°C(°F)	+/- 1(2)
Logging rate	Every 1Sec	every 12 hours	-
1/2AA 3.6V Lithium Battery Life			Month	6

EL-USB-TC features 2 LEDs

The first LED flashes orange (O) to indicate a problem condition on the EL-USB-TC.

The second LED flashes green oR red (G/R) to indicate alarm level status. It will flash red when the logged temperature has exceeded a Low or High alarm level.
LED Modes/Warning signals chart

By default latching is enabled, so the red LED will continue to flash even after the logged temperature has returned to normal. The red LED will effectively have latched into its alarm condition. This feature ensures that the user is notified that an alarm level has been exceeded, without the need to download the data from the logger.

Latching can be turned off via the control software. The red LED will then no longer continue to flash after the logged temperature has returned to normal. Instead, the green LED will flash.

Ordering Information
Model	Description	Buy Online	Price
ELUSBTC	Lascar EL-USB-TC Thermocouple Data Logger with USB Interface		$82.00
Included Accessories
	1 - Software on CD 1 - 6V battery 1 - Basic K-type Thermocouple	Included

Lascar EL-USB-TC Thermocouple Data Logger with USB Interface

Lascar EL-USB-TC
Thermocouple Data Logger with USB Interface