|
Model |
CS-5400 |
CS-5405 |
CS-5450 |
CS-5455 |
| CRT Type accelerating voltage |
150 mm rectangular with internal graticule 8x0div.
( 1div.=10 mm ) /approx. 12 kV |
|
Vertical Axis (CH1, CH2) |
|
Sensitivity |
5
mV to 5 V/div |
± 2% |
|
1
mV, 2 mV/div |
± 5% |
| Attenuator |
1-2-5
step, 12 ranges, fine adjustable within the selected range |
| Input Impedance |
1
M ±
1%, approx. 20 pF |
|
Frequency
Responseb> |
5 mV to 5 V/div. |
DC:
DC to 100 MHz (within -3 dB) DC: DC to 50 MHz (within -3 dB)
AC: 5 Hz to 100 MHz (within -3 dB) AC: 5 Hz to 50 MHz (within -3 dB) |
|
1 mV, 2 mV/div. |
DC:
DC to 20 MHz (within -3 dB)
AC: 5 Hz to 20 MHz (within -3 dB) |
|
Rising Time |
5
mV to 5 V/div. |
approx. 3.5 ns |
approx.
7 ns |
|
1
mV, 2 mV/div.: |
approx.
17.5 ns |
| Signal Delay Time |
Leading edge can be
confirmed using a square wave that has a rising time of less than
this unit |
| Crosstalk |
-40 dB (at 1 kHz) |
| Max. Input Voltage |
800 Vp-p or 400 V
(DC + AC peak, 1 kHz) |
|
Vertical Axis (CH3) |
| Sensitivity |
0.1 V, 0.5 V/div. ± 2% |
| Input Impedance |
1 M
± 1%,
approx. 20 pF |
| Frequency Response |
DC to 100 MHz
(within -3 dB) |
DC to 50 MHz (within -3 dB) |
|
Rising Time |
Approx. 3.5 ns |
Approx. 7 ns |
| Signal Delay Time |
Leading edge can be
confirmed using a square wave that has a rising time of less than
this unit |
| Max. Input Voltage |
100 Vp-p or 50 V
(DC + AC peak, 1 kHz) |
|
Vertical Axis |
| Operation Mode |
CH1, CH2, CH3, ADD,
ALT, CHOP |
| Chopping Frequency |
Approx. 250 kHz |
| Polarity Inversion |
CH2 only |
|
Horizontal (CH2 Input, except x10 MAG) |
|
Sensitivity |
5 mV to 5 V/div. |
± 3% |
|
1 mV, 2 mV/div. |
± 5% |
| Input Impedance |
Same as vertical axis
(CH2) |
|
Frequency Response |
DC |
DC to 1 MHz ( -3 dB) |
|
AC |
5 Hz to 1 MHz ( -3 dB) |
| X-Y Phase Difference |
Less than 3° at 100
kHz |
| Operation Mode |
Switchable to X-Y mode
with H.MODE key (CH1: Y axis, CH2: X axis) |
| Max. Input Voltage |
Same as vertical
axis (CH2) |
|
Sweep |
|
Sweep Mode |
A, ALT, B, X-Y |
|
Sweep
Time |
A Sweep |
0.5 s to 50 ns/div. ± 2%,
1-2-5 step, 22 ranges, fine adjustable within the selected range |
|
B Sweep |
50 ms to 50 ns/div. ± 2%,
1-2-5 step, 19 ranges |
| Sweep Magnification |
x10 ± 5%, (± 8% at
0.5 µs, 0.1 µs and 50 ns/div. ) |
|
Linearity |
± 3% (± 5% at x10 MAG
mode) |
|
Hold Off |
A Sweep, continuously
variable from NORM position |
| Trace Separation |
B Sweep is
continuously variable ± 4 div.
with respect to A sweep. |
|
Delay Sweep Mode |
AFT.D |
Continuous delay
(After Delay) |
|
B TRG'D |
Synchronous delay (B
TRIG'D): Synchronized with trigger signal |
| Delay Time |
Continuously variable from
0.2 div. to 10 div. (0.5s/div. to 50ns/div.) |
| Delay Time Error |
± (3% of
setting value + 1% of full scale) + (0 to 300 ns): CS-5400, CS-5450
± 4% of
reading value : CS-5405, CS5455 |
| Delay Jitter |
20000 (10 times
of A Sweep setting value) : 1 (at A Sweep 1 ms/div, B Sweep 1
µs/div) |
|
Triggering Mode |
| Trigger Mode |
AUTO, NORM, FIX, SINGLE,
RESET |
| Trigger Sources |
VERT, CH1, CH2, CH3,
LINE |
| Trigger Coupling |
AC, HF-REJ, DC,
TV-F, TV-L |
