| Specifications |
|
Specifications |
Description |
|
Measurement Functions |
Number of Channels |
2 |
|
Type of Measurement |
Distortion
Measurements (electronic auto-balancing, balance
adjustment range within ±10000 με) |
|
Input Connectors |
Connector Type |
Via adapter cable, TAJIMI
PRC03-12A10-7M10.5 |
|
Max. rated voltage to earth |
33 Vrms or
70 V DC |
|
Suitable transducer |
General |
Strain gauge converter |
|
bridge impedance: |
120 Ω to 1 kΩ (bridge voltage 2 V), 350 Ω to 1 kΩ
(bridge voltage 5 V, 10 V), bridge voltage 2, 5, 10
±0.05 V |
|
Measurement Range |
General |
20 με - 1000 με/division, 6 ranges, full
scale: 20 divisions |
|
low-pass filter |
5/10/100/1 kHz |
|
Anti-aliasing filter |
Integrated filter for suppressing
aliasing distortion caused by FFT
processing (automatic cutoff frequency setting/OFF) |
|
Measurement Resolution |
1/1600 of measurement range (using 16-bit
A/D conversion; installed in 8860/8861) |
|
Highest sampling rate |
200 kS/s (2-channel simultaneous sampling) |
|
Accuracy After auto-balancing |
DC amplitude |
±(0.4% of full scale +2 με) |
|
Zero Position |
±0.1% of full scale (at 5 Hz filter
ON) |
|
Frequency characteristics |
DC to 20 kHz +1/-3 dB |
|
Max. allowable input |
10 V DC (the maximum voltage that can be
applied across input pins without damage) |
|
Dimensions and Weight |
approx. 170 (6.69in) W × 20 (0.79in) H ×
148.5 (5.85in) D mm
approx. 290 g (10.2 oz) |
){kind=small}
