Hioki 3560
AC Milliohm HiTester

Fast measurement and fast quality determination
Low-Power resistance measurement
Battery measurement
High-Resolution measuring
Sense check function for prevention of erroneous measurements
Interface provided
Versatile array of leads

Hioki 3560 Shown

Product Information
Datasheet	319 KB
PDF Help

The Hioki 3560 contact resistance meter complete with comparator function and external interface utilizes the principles of the AC 4-terminal method that gives priority to line use and allows measurement offering high speed, high accuracy and high resolution. External output terminal, external control terminal and RS-232C interface are standard features. GP-IB interface and printer interface are optionally available. The instrument also features an m-Ohm and V mode that allows simultaneous measurement and comparison of battery internal resistance and open-circuit voltage. This HiTester is highly suitable for battery inspection lines as one unit can act as both a low-resistance meter and DMM.

Specifications
Measurement ranges and Accuracy	30 m-Ohm to 3 k-Ohm, 6 ranges, ±0.5 % rdg. ±8 dgt. (all ranges) In the case of MEDIUM: Add 3 dgt. to the above dgt. error. In the case of FAST: ±0.5 % rdg. ±8 dgt. (30 m-Ohm), ±0.5 % rdg. ±6 dgt. (other ranges), However, in the case of FAST, the display counter decreases 4 digits in all ranges.
Measurement current	7.4 mA (30 m-Ohm range) to 1.5 µA (3 k-Ohm range)
Max. applied measurement	60 V DC (AC input is not possible)
Sampling Speed	50 times/s (FAST) to 1.56 times/s (SLOW) at 50 Hz mode 60 times/s (FAST) to 1.88 times/s (SLOW) at 60 Hz mode
Display	31,000 full digits (resistance), 50,000 full digits (voltage), Fluorescent tube
Measurement method	1 kHz AC four-terminal measurement
Open-circuit terminal voltage	20 mV peak max. (30 m-Ohm to 3 k-Ohm all ranges)
Comparator functions	Setting: Upper and lower limit, Up to 30 tables Output: 3 levels (Hi, In, Lo) or (Pass, Fail), Open-collector, display, beep sound
Power supply	100 to 240 V AC (50/60 Hz)
Dimensions, mass	215 mm(8.46 in)W × 80 mm(3.15 in)H × 320 mm(12.6 in)D, 2.1 kg (74.1 oz)

Ordering Information
Model	Description	Buy Online	Price
3560	Hioki 3560 AC Milliohm HiTester - Special Price!		$2,142.29 (Reg. $2,349.00)
Included Accessories
	1 - 9287 Test Lead 1 - Power Cord	Included
Optional Accessories
Measurement Leads
9452	Hioki 9452 4 Terminal Probe for 3555 - Special Price!		$175.77 (Reg. $189.00)
9453	Hioki 9453 4 Terminal Probe for 3555 - Special Price!		$110.67 (Reg. $119.00)
9455	Hioki 9455 Pin-Type Lead - Special Price!		$743.07 (Reg. $799.00)
9461	Hioki 9461 Pin Type 4 Terminal Probe - Special Price!		$120.85 (Reg. $129.00)
9465	Hioki 9465 Pin Type 4 Terminal Probe - Special Price!		$185.95 (Reg. $199.95)
9467	Hioki 9467 Large Clip 4 Terminal Probe - Special Price!		$158.05 (Reg. $169.95)
Printers
9589	Hioki 9589 Printer Interface - Special Price!		$212.97 (Reg. $229.00)
9203	Hioki 9203 Digital Printer - Special Price!		$1,272.24 (Reg. $1,395.00)
9425	Hioki 9425 Printer Cable - Special Price!		$83.65 (Reg. $89.95)
9233	Hioki 9233 Recording Paper for the 9203, and 3155 - Special Price!		$46.45 (Reg. $49.95)
PC Communications
9454	Hioki 9454 Zero Adjustment Board - Special Price!		$53.81 (Reg. $59.00)
9466	Hioki 9466 Remote Control Switch - Special Price!		$36.27 (Reg. $39.00)
9588	Hioki 9588 GP-IB Interface - Special Price!		$324.57 (Reg. $349.00)
915102	Hioki 9151-02 GP-IB Connector Cable (2 Meter) - Special Price!		$278.07 (Reg. $299.00)
915104	Hioki 9151-04 GP-IB Connector Cable (4 Meter) - Special Price!		$278.07 (Reg. $299.00)

Hioki 3560 AC Milliohm HiTester

Hioki 3560
AC Milliohm HiTester