|
Specifications |
Description |
|
Output |
Serial digital BNC connector. Output
impedance 75 ohms. SMPTE. |
|
259M, ITU-R BT.601/656 serial
component.800mV pp. |
|
Full 10 bit pattern generation. |
|
Addition of CRC checksum word. |
|
Addition of embedded tone at -18db.
|
|
Composite BNC connectors. Output
impedance 75 ohms. 1 volt p/p +/- 1% PAL, NTSC or PALM
from 9 bit dac. |
|
Differential gain and phase +/- 1% and
+/- 1 deg. |
|
Sch phase 0 +/- 5 deg. |
|
Audio 3 pin xlr plug. |
|
Analog: 1KHz tone 0db to +8db balanced to
600 ohms Thd <0.5%. . |
|
Digital: AES/EBU encoded 1KHz tone,
balanced output to 110 ohms. |
|
Frequency: The crystal master oscillator
is accurate to better than +/- 15ppm |
|
Power |
Current draw is 600mA |
|
Mains supply 240-110VAC +/-20% 50/60Hz
10VA max |
|
Environment |
Indoor use, 5 to 45 deg.C. Ambient to 2,000m. |
|
Max humidity 80% to 31 degrees Celsius
decreasing to 50% at 40 degrees Celsius. |
|
Overvoltage category 2 |
|
Pollution degree 1 |
Dimensions
(Height x Width x Depth) |
19.3" x 9.9" x 1.8" Inches
(490 x 250 x 45 mm) |
|
Weight |
6.6 Lbs.
(3Kg) |
|
Customized Patterns |
All the Digigen range can have customized
patterns (DIGIGEN - CP) - (typically 5No units min
order). Prices dependant on order |