Hameg Catalog | Hameg Price List

 

<< Hameg Oscilloscopes

Hameg HM2005-2 2 X 200 MHz Analog Oscilloscope,
Dual Timebase, Readout/Cursor

• 2 Channels, 1mV - 5V/div, Delay Line, 14kV CRT
• Integrated 6 digit frequency counter
• Time Base A: 0.5s - 5ns/div
• Time Base B: 20ms - 2ns/div. , 2nd Trigger
• Triggering DC - 300MHz, Automatic Peak to Peak
• Alternate Trigger, Calibrator and Component Tester

Hameg HM2005-2 Shown

Product Information
Datasheet	162 KB
PDF Help

This microprocessor controlled oscilloscope has been designed for a wide multitude of applications in service and industry. For ease of operation the "Autoset" function allows for signal related automatic setup of measuring parameters. Onscreen alphanumeric readout and cursor functions for voltage, time and frequency measurement provide extraordinary operational convenience. Nine different user defined instrument settings can be saved and recalled without restriction. The built-in RS-232 serial interface allows for remote controlled operation by a PC.

The outstanding features of the HM2005 include two vertical input channels and the second time base with the ability to magnify, over 1000 times, extremely small portions of the input signal. The second time base has its own triggering controls, including level and slope selection, to allow a stable and precisely referenced display of asynchronous or jittery signal segments. The trigger circuit is designed to provide reliable triggering to over 300 MHz at signal levels as low as 0.5div.  An active TV Sync Separator for TV-signal tracing ensures accurate triggering even with noisy signals. The built in Y delay line allows for leading edge display of even low repetition rate signals, supported by the 14 kV CRT with its high intensity. Both instruments are equipped with a built in component tester.

Because it is so important to be able to trust the accuracy of the display when viewing pulse or square signals, the HM2005 has a built-in switchable calibrator, which checks the instrument's transient response characteristics - from probe tip to CRT screen. The essential high frequency compensation of wide band probes can be performed with this calibrator, which features a rise time of less than 6ns.

This instrument offers the right combination of triggering control, frequency response, and time base versatility to facilitate measurements in a wide range of applications - in laboratory as well as in field service use. It is another example of Hameg's dedication to engineering excellence.