Hameg Catalog | Hameg Price List

 

<< Hameg Modular Systems Series 8000

Hameg HM8040-3
Triple Power Supply

• 3 independent DC Supply Voltages
• 2x0-20V, 0.5A; 1x5V, 1A (when operated
  with HM8001-2)
• Floating Outputs
• Digital Display for Voltage and Current
• Adjustable Current Limiter
• Parallel and Serial Operation
• Requires HM8001-2 Mainframe Unit for operation

Hameg HM8040-3 Shown

Product Information
Datasheet	77 KB
Manual	382 KB
PDF Help

The HM8040-2 Triple Power Supply is a compact modular unit developed to supply power to laboratory test systems and is also used in technical schools and educational institutions. The HM8040-2 is a conventionally designed, linear series regulator configuration that assures dependable, low-noise power output. Three floating output voltages supply a maximum capacity of 25 Watts.

Two continuously variable outputs of 0 to 20V are combined with a 5.0V output that is adjustable ±0.5V. This is an excellent feature when working with digital logic circuitry. Current limiting for both 20V ranges is continuously adjustable. The transition from voltage control to current control is automatic and clearly indicated. Each 3-digit display is switchable to display either voltage or current. All outputs can be switched ON / OFF simultaneously via a single push button switch, which permits voltage value set-up while the output is switched off. Series or parallel configuration is possible between all of the three floating outputs.

Excellent line and load regulation is provided in addition to low residual ripple and noise. There is suitable protective circuitry for all of the power outputs.

Due to maximum power limitations, only one HM8040-2 at a time can be used in an HM8001-2 Mainframe.