Fluke 123 Accessory Recommendations for Measurements Over 42V Peak on Sale at Test Equipment Depot

Accessory recommendations for measurements over 42V peak (>30V rms) Similar to a multimeter, but unlike a conventional oscilloscope, the ScopeMeter input connectors have no exposed metal and are fully insulated to protect against electrical shock. The ScopeMeter COM (common) inputs (Input A shield, Input B shield, and black banana jack) are connected internally via self-recovering fault protection. Any voltage on one COM input will be present on all COM connections.
To avoid risk of electrical shock, use only the following accessories when a ScopeMeter COM input is connected to >42V peak (30V rms):
PM8907/801 PM8907/803 PM8907/804 PM8907/806 PM8907/807 PM8907/808 PM8918/001 PM8918/002 PM8918/003 PM8918/101	PM8918/202 PM8918/301 ITP120 PM9094/001 PM9081/001 PM9082/001 PM9084/001 PM9085/001 PM9090/001	PM9091/001 PM9092/001 PM9093/001 PM9080/001 PAC91 80i-110s 80i-1000s	TL224 TL75 STL120 AC20 AC120 HC120 BB120
Other ScopeMeter compatible accessories are only suitable when the ScopeMeter COM input is connected to an earth ground potential or <42V peak (30V rms).

Accessory recommendations for measurements over 42V peak (>30V rms)