Test Equipment Depot - 800.517.8431
Test Equipment Catalog Specials  Repair Surplus Ordering/Contact Info

 

Fluke
Fluke Catalog | Fluke Price List
 
<< Fluke Current Clamp Meters
<< Fluke AC/DC Clamp Meters

Fluke 355 AC/DC TRMS 2000 A Clamp Meter
See Also: Fluke 353 Clamp meter
  • Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
  • The large 58 mm (2.3 in) jaw capacity is suitable for large, or multiple conductors
  • CAT IV 600 V, CAT III 1000 V rating for added user protection
  • In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting
  • Quickly analyze readings using the MIN, MAX, and AVG functions
  • A large backlit display allows for easy visibility in low-lit areas
  • Use the display hold feature to capture readings even when the display cannot be viewed
  • Use the low-pass filter to smooth out noisy loads and stabilize readings
Click here for larger image of the Fluke 355 AC/DC TRMS 2000 A Clamp MeterClick here for larger image of the Fluke 355 AC/DC TRMS 2000 A Clamp Meter
Fluke 355 Shown

Product Information
Datasheet 1.9 MB
Ordering Info

Jump to Product Models, Prices, Accessories, and Ordering Information

PDF Help
 
Fluke Introduces a new line of Clamp meters which promise to surpass expectations, meaning the user can confidently take reliable readings with the true-rms. The Fluke 355/353 Clamp Meters; the tools of choice for high-current measurements up to 2000 A.

The Fluke 355 is designed with extra-wide jaw easily to clamp around large conductors typically found in high-current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings, add an extra element of protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The Fluke 355's Sister Clamp meter, the Fluke 353, lacks the ability to measure voltage and resistance, however this makes it more affordable for those people who require a high quality product and do not require excess options. The functions of these two clamp meters easily makes the Fluke 353 and 355 the most versatile tool for utilities, electrical contractors, and industrial service technicians.
 
Fluke 355 Specifications
Electrical Specifications
Current Measurement DC and AC: 10 Hz to 100 Hz
Range 40A 400A 2000 A; 1400 ac rms
Resolution 10 mA 100 mA 1 A
Accuracy 1.5% rdg + 15 digits 1.5% rdg + 5 digits
Trigger Level for Inrush 0.50 A 5.0 A 5 A
Trigger Level for Hz Filter Off 2.50 A 2.0 A 8 A
Filter On 0.50 A 2.50 A 8 A
Voltage Measurement: 10 Hz to 100 Hz
Range 4 V 40 V 400 V 600 V AC RMS 1000 V DC
Resolution 1 mV 10 mV 100 mV 1V
Accuracy 1 % rdg + 10 digits 1 % rdg + 5 digits
Trigger Level for Hz Filter Off/On 0.050 V 0.25 V 6 V N/A
Voltage Measurement: 100.1 Hz to 1 kHz
Range 4 V 40 V 400 V 600 V AC RMS
Resolution 1 mV 10 mV 100 mV 1 V
Accuracy 3 % rdg + 10 digits 3 % rdg + 5 digits
Ohms Measurement
Range 400 Ω 4k Ω 40kΩ 400k Ω
Resolution 0.1 Ω 1 Ω 10 Ω 100Ω
Accuracy 1.5 % rdg + 5 digits
Crest Factor (50/60 Hz)
Range 40A 400A 2000 A; 1400 ac rms
Crest Factor (50/60 Hz) 2 @ 33 A 2 @ 330 A 2 @ 1000 A
2.4 @ 27 A 2.4 @ 270 A 2.4 @ 833 A
Add 2 % to error spec for CF > 2
Continuity Beeper
Range On at: ≤ 30 Ω
Off at: ≥ 100 Ω
Current Measurement AC: 100.1 Hz to 1 kHz
Range 40A 400A 2000 A; 1400 ac rms
Resolution 10 mA 100 mA 1 A
Accuracy ( A) 1.5% rdg + 15 digits 1.5% rdg + 5 digits
Trigger Level for Inrush 0.50 A 5.0 A 5 A
Trigger Level for Hz Filter Off 2.50 A 2.0 A 8 A
Filter On 0.50 A 2.50 A 8 A
Frequency measurement
Measurement Range 5.0 Hz to 1 kHz
Resolution 0.1 Hz (15 Hz to 399.9 Hz)
1 Hz (400 Hz to 1 kHz)
Accuracy 5.0 Hz to 100 Hz 0.2 % + 2 counts
100.1 Hz to 1 kHz 0.5 % + 5 counts
Trigger Level Refer to current and voltage tables
Environmental Specifications
Operating Temperature 32 °F to + 122 °F (0 °C to +50 °C)
Operating Humidity 0 to 95 % (non-condensing)
Operating Altitude 2000m
IP Rating 42 (Indoor use Only)
Drop Test Requirements 1 m
EMI, RFI, EMC FCC part 15, IEC/EN 61326-1:1997 class B
IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
Temperature co-Efficient Current  0.1 % of reading per °C outside 22 °C to 24 °C
Voltage  0.1 % of reading per °C outside 22 °C to 24 °C
General Specifications

Batteries:

6- 1.5 V AA NEDA 15 A or IEC LR6

Test Leads:

Rated to 1000 V

Jaw Size: 

2.28 inches (58 mm)

Dimensions (L x W x D):  

 12 inches x 3.75 inches x
2 inches (300 mm x 98 mm x 52 mm)

Safety Rating:

 IEC 61010-2-032, 600 V CAT IV,
1000 V CAT III

Back to Top>>
 

Ordering Information
Model

Description

Buy Online

 Price
355  Fluke 355 AC/DC TRMS A Clamp Meter, 2000 A - Special Price!  Buy Now $671.60
(Reg. $706.95)

Included Accessories
 
  • 1 - C43 soft carrying case
  • 6 - AA batteries
  • 1 - User manual
Included

Optional Accessories
Replacement Parts
AC285  Fluke AC285 SureGrip Large Alligator Clip  Buy Now $17.37 
C43  Fluke C43 Soft Carrying Case  Buy Now $57.37 
TL224  Fluke TL224 Suregrip+ Silicone Test Leads  Buy Now $21.97 
TP2  Fluke TP2 Test Probes, Slim-Reach, 2mm Diameter  Buy Now $13.89 
Additional Parts
AC220FLUKE  Fluke AC220 SureGrip Alligator Clips  Buy Now $28.94 
TLK220  Fluke TLK220 Suregrip Accessory Set  Buy Now $112.51 
TP220  Fluke TP220 Suregrip+ Test Probes  Buy Now $13.89 
 
Fluke Catalog   |   Fluke Price List

$20.00 Minimum on Total Order

Home Page | Test Equipment Catalog | Specials | Repair
We Buy Surplus | Ordering/Contact Info
____________________________________________________________

99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:

Copyright © Fotronic Corporation All Rights Reserved