|
VERTICAL
SYSTEM |
| Bandwidth |
| CH1 and CH2 |
DC~150MHz - 3 dB
(DC~40MHz - 3dB at 2mV/div) |
| Input R & C |
1MΩ±1.5%,
approx. 20 pF |
| Dynamic Range (from center
screen) |
More than 8 div at
150MHz |
| Sensitivity
(per division) |
| CH1 and CH2 |
2mV/div~5V/div
(1-2-5 step) except 0.25µs/div |
| Accuracy |
2mV/div: ±5%
5mV/div~5V/div: ±3% |
| Input Coupling |
AC, DC, GROUND |
| Maximum input |
| DC + Peak AC |
400V (DC + AC
Peak) (AC <1kHz) |
| Square Waveform Rising Time |
Approx. 2.3 ns |
| Input Coupling Offset |
±0.2div at
5mV/div~5V/div
±0.5 div at 2mV/div |
| Cross Talk |
| Channel Isolation |
Less than 0.3div
at 50MHz |
| CH1, CH2
Balance |
|
ATT BAL |
±0.2div at
5mV/div~5V/div
±0.5 div at 2mV/div |
| Drift |
±0.3div/h |
|
HORIZONTAL
SYSTEM |
| Resolution |
Approx. 80ps |
| Time/div |
Equivalent:
2ns/div~0.1µs/div
Real time: 0.25µs/div~0.1s/div
Roll Mode: 0.2s/div~5s/div |
| Pre Trigger |
Max. 10div |
| Position Movement |
10div |
|
ACQUISITION
SYSTEM |
| Max. Sample Rate |
200MS/s for one
channel
100MS/s per channel
25GS/s per channel in equivalent sampling range |
| Sampling Resolution |
8 bit |
| Single Shot BW |
Max. 20MHz |
| Peak Detect |
10ns (5µs/div~5s/div) |
| Record Length |
Max. 32kbytes/CH |
| Average |
Number of averages
selectable/2~128 |
| Persistance |
Real time mode
only |
|
TRIGGER SYSTEM |
| Sensitivity |
| CH1 and CH2 |
Freq. |
5mV~5V/div |
2mV/div |
| DC~10MHz |
0.5div |
0.5div |
| 10MHz~80MHz |
1.5div |
1.5div at
10MHz~40MHz |
| 80MHz~150MHz |
2.0div |
| Trigger Type |
Edge, TV |
| Trigger Mode |
AUTO, NORM, SINGLE |
| Trigger Slope |
Positive Edge
Negative Edge |
| Trigger Source |
CH1, CH2, EXT,
LINE |
| Trigger Couple |
AC, DC, LF-rej,
HF-rej |
| Trigger Sync |
Line, Field |
| Trigger Level Extent |
INT: ±3div, EXT:
±35% of 4 Vpk |
| Set Level to 50% |
±0.2div |
| External Trigger
Sensitivity |
0.2Vpp (DC~150MHz) |
| External Trigger Input
Maximum Input |
400V (DC + AC
Peak) (AC < 1kHz) |
| External Trigger Input
R&C |
About 1M Ohm |
|
DISPLAY SYSTEM |
| Display |
5.7 inch LCD with
CCFL backlight |
| Resolution |
320 X 240 pixels |
| Controls |
Front-panel
intensity control |
|
ADVANCED
FUNCTIONS |
| Automatic Measurements |
Amplitude (Pk-Pk,
RMS, Mean)
Frequency, Rise time, Falling time, period
Pulse width (positive, negative), Duty ratio |
| FFT |
Rectangular,
Hanning, Hamming window |
| Utility |
System staus,
error log view
option setup
Self Calibration |
| Save/Recall |
10 waveforms
10 front panel setups |
| Math (CH1 CH2) |
Addition,
subtraction, inversion |
| Auto Setup |
50Hz ~ 150MHz at
more than 60mVpk |
| External I/O (option) |
RS-232C, SPP*, USB |
| Hard Copy |
Hard Copy through
the SPP or RS-232C |
| Supported
Printer |
DeskJet™,
LaserJet™ with PCL level 3 |
| Printy2™,
RS-232C thermal printer |
*SPP is standard
parallel Port.
DeskJet and LaserJet is a registered trademark of HP.
Printy2 is a registered trademark of SANEI Electric Inc. |
|
GENERAL |
| Power Requirement |
90VAC~250VAC
48Hz~440Hz |
| Power Consumption |
Max. 30W |
| Ambient
Temperature |
Specification
Guaranteed |
10°C ~ 35°C
(when automatic calibration is performed in the range of 25±5°C) |
| Operating |
0°C ~ 40°C |
| Storage |
-10°C ~ +60°C |
| Humidity |
| Operating |
45 ~ 80% RH |
| Storage |
35 ~ 85% RH |
| EMC |
CE (EN 61326) |
| Size |
370 X 167 X 338
(unit mm) |
| Weight |
5.5 kg |
| Warranty |
1 year |
| Safety |
CE (EN 61010-1),
C-UL (UL 3111-1/CSA 1010-1)
CAT II
Pollution degree II |
|
FACTORY
DEFAULTS |
|
ITEM |
FACTORY
SETTING |
|
ITEM |
FACTORY
SETTING |
| CH1 Display |
ON |
Run/Stop |
RUN |
| CH1 Input Coupling Mode |
DC Coupling |
Cursor Mode |
OFF |
| CH1 Volts/div |
20mV |
Display Grid |
Full |
| CH1 Vertical Position |
+2 div |
Display Format |
YT |
| CH1 Probe Attenuation
Setting |
10x (10:1) |
Display Type |
Dots |
| CH2 Display |
ON |
Display Persistence |
OFF |
| CH2 Input Coupling Mode |
DC Coupling |
Acquire Average |
OFF |
| CH2 Volts/div |
20mV |
Acquire Peak Detect |
OFF |
| CH2 Vertical Position |
-2 div |
LCD Contrast |
50% |
| CH2 Probe Attenuation
Setting |
10X (10:1) |
RS-232C Baud Rate |
19200 |
| Time Base |
0.1 ms |
RS-232C Parity |
None |
| Trigger Mode |
AUTO |
RS-232C Stop bit |
1 bit |
| Trigger Source |
CH1 |
Measure |
OFF |
| Trigger Coupling |
DC |
Math Display |
OFF |
| Trigger Slope |
Rising Slope |
Recall Display |
OFF |
| Trigger Level |
0 div |
Record Length |
1k |
)
