EdgeTech 16TDP
Oxygen and Dew Point Analyzer

• Made for fast, accurate and economic measurement of Oxygen and Dew point at trace levels
• A simple menu-driven software, touchpad and large LCD display allow easy and fast start-up of the instrument
• Compact economic instrument with sensor separate from the electronics
• Sensor with long operating life
• No range switching required
• Instructions and error messages in normal text (e.g. calibration not OK, change measuring cell)
• User can select any range within 0 - 10000 ppm and 0.1 - 1000ppm humidity
• Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement
• For Oxygen concentration and Dewpoint 2 x 4-20 mA output is standard

The user can select any range within 0 - 10000 ppm and 0.1 - 1000ppm humidity. Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement.

For Oxygen concentration and Dewpoint 2 x 4-20 mA output is standard. Other outputs are available on request. RS485 is an option.

The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.

The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen freely within the measuring range.

The measuring cell is modular and is made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.