<< B&K Precision Signal and Function Generators

BK Precision 4017B
10 MHz Sweep/Function Generator

Up To 10MHz Available On Sine, Square & Ramp Waveforms
2 x 16 LCD Display Area
Clean Output Waveforms
"Intelligent Encoder" Frequency Control Knob
Linear And Log Sweeps
Output Level Displayed On The LCD
CMOS/TTL Outputs
Adjustable DC Offset
RS232 Interface

BK Precision 4017B Shown

Product Information
Datasheet	75 KB
Manual	934 KB
PDF Help

Applications:

Design Engineering
Manufacturing
Servicing
Education

The B+K Precision 4017B DDS Sweep/Function Generator is a versatile signal source which combines several functions into one unit including waveform generator, pulse generation (through variable symmetry), frequency sweep and frequency counter.

The B+K Precision 4017B is a DDS based system that produces precision timing for sine, square, or triangle wave generation with frequencies between 0.01 Hz and 10 MHz. A continuously variable offset allows the output to be injected directly into circuits at the correct bias level. The versatility and capabilities of the 4017B allows for a vast number of applications in both analog and digital electronics fields including DE

Specifications		Model 4017B
Frequency Characteristics	Waveforms	Sine, Square, Triangle, +-Pulse, +-Ramp
	Range	0.01 Hz to 10 MHz in 5 Ranges
	Resolution	5 Digits
	Variable Duty Cycle	0 to 100% Cont Variable
	Fine	+-5% Of Coarse Setting
	Operating Modes	Normal, Sweep, VCG
	Frequency Stability	Output will change less than 0.009% over 15-minutes after 1-hour warm-up
Output Level Characteristics	Impedance	50Ω +- 10%
	Level	0.02 to 20 Vp-p Open Circuit 0.01 to 10Vp-p into 50Ω (Accuracy: ±50mVp-p)
	Amplitude	Variable
	Attenuation	2 Ranges one with a -20dB (± 1 dB) and one without
	DC Offset	Preset: ± 0.1 V typical Variable: ± 10V open circuit ±5 into 50Ω
SINE Wave	Distortion	≤=1% typical at 1 kHz
SINE Wave	Flatness	&plusmn5% ±(.45dB)
Square Wave	Symmetry	0.1 Hz to 100 kHz ≤ 2%
	Rise Time	≤= 20 ns (10% to 90%)
	Triangle Wave	Linearity: >= 98% to 100 kHz
TTL Output	Threshold Level	0.8V to 2.4V
	Rise Time	<= 25nS (10% to 90% of Threshold)
	Duty Cycle	50% Typical
CMOS Output	Max. Frequency	10 MHz
	Level	4V to 14V ±0.5Vp-p (cont. variable 5MHz max)
	Rise Time	≤= 120nS (10% to 90%)
VCG (Voltage Controlled Generator)	Input Voltage	0-10V ± 1V causes a 100:1 frequency change
VCG (Voltage Controlled Generator)	Impedance	10kΩ ±5%
Sweep Operation	Mode	LIN/LOG
	Width	100:1 continuously variable, 3-digit resolution
	Rate	0.01s to 30s cont variable, 4-digit resolution
	Sweep Output	0 to 10Vpp (into 50Ω)
Frequency Counter	Range	5Hz to 100MHz (1 & 10S Gate) 50Hz to 100MHz (01S Gate) 100Hz to 100MHz (0.01S Gate)
	Accuracy	Time Base Accuracy ± 1 Count
	Time Base Accuracy	± 10ppm (23° +-5°C)
	Display	9 Digit LED
	Aging	±5ppm/year
	Input	50mVpp to 10Vpp
External Input	Power Source	110/220 VAC ±10% 50/60 Hz, internal jumper selectable

Ordering Information
Model	Description	Buy Online	Price
4017B	BK Precision 4017B 10MHZ DDS Sweep/Function Generator		$499.00
Included Accessories
	1 - Output Cable with BNC to Alligator Clips 1 - Instruction Manual	Included
Optional Accessories
CC21	BK Precision CC-21 BNC Breakout to Alligator Clips		$11.44
LC40	BK Precision LC 40 FUNCTION GENERATOR CARRYING CASE		$87.36
TLFG	BK Precision TLFG Function Generator Test Leads Set		$82.00

BK Precision 4017B 10 MHz Sweep/Function Generator

BK Precision 4017B
10 MHz Sweep/Function Generator