|
CATV Analyzer with Independent Span & Resolution Bandwidth
The PSA-37XP covers the whole CATV frequency range from 1 to 1100 MHz in
addition to the Satellite L band from 950 to 2150 MHz. The unit has a ±
2 dB amplitude accuracy which makes this the perfect analyzer for the
field technician or for testing and setting head-end levels. The
variable span width makes it easy to either look at the whole band or
pinpoint a particular frequency or channel.
No AC/No Problem
The built-in long life Li-Ion battery pack (and a built in charger) lets you
work right at the antenna; no need for extension cords. You can also run or
charge on vehicle or line power. THE PSA-37XP has a built in DC Block with
+13/18 VDC & 22 KHz for powering LNAs and LNBs.
Satellite Dish Alignment a Snap
If you are doing DBS installs you need to be on and off the job fast! DBS
signals such as DISH NETWORK and DIRECT-TV can be seen with Avcom’s
PSA-37XP. Normal DBS antenna alignments, such as roof, wall, or backyard can
be accomplished in seconds because the DBS receiver and TV monitor do not
have to be at the antenna.
Creative Installations Made Easy
The PSA-37XP can really help with more creative DBS dish installations
inside buildings, looking through sparse foliage or windows, smaller
antennas, etc. When the signal is not optimum, using the PSA-37XP, the
signal can be quickly located and measured even though it is below the
receiver’s signal strength requirement.
|
)
PDF Help