- RS-422 Control Port (Sony), 9-pin D, for Machine Control
- 10-bit uncompressed SDI with embedded audio I/O
- Analog (10-bit A/D and D/A) video inputs/outputs:
- S-Video I/O
- Composite NTSC/PAL Video I/O
- Component YPbPr/RGB Video I/O
- Genlock/Reference Video (looping)
- 24-bit Digital/Optical/Analog Multi-Channel Audio:
- 4-channel AES/EBU Audio I/O
- 4-channel Balanced/Unbalanced Analog Audio in Connectors support
XLR or TRS-type Connections
- 4-channel Balanced Analog Audio Out Connectors (XLR)
- 8-channel Optical Audio I/O
- 8-channel Balanced Audio Monitor Out
- 8-channel Embedded Audio Over SDI
- Audio Word Clock Connector (BNC) for Audio Synchronization
- Front Panel Status Indicators:
- Power On/Off
- FireWire (active/inactive)
- Ref(Genlock)
- NTSC or PAL
- Front Panel Mode Indicators
- Front Panel Video/Audio Input Source Indicators:
- Video: Present, SDI, Component, Composite and S-Video
- Audio: Present, SDI, ADAT, AES/EBU and Analog
|
|
|
AJA Io offers Final Cut Pro users unsurpassed 10-bit uncompressed video
and multi-channel audio. With Io, you can configure a Power Mac as a
professional editing suite, corporate/industrial video center, or
high-powered desktop video setup - and just about anything in between.
Both analog and digital sources are offered, allowing connection to just
about every kind of video/audio peripheral from the most current digital
decks to old legacy devices. It does this with unique simplicity, using
a single FireWire connection between Io and the Apple Power Mac - while
serving simultaneous real time connection for all audio and video
sources.
|
|
Io Specifications |
|
Video Input |
Digital: |
8 or 10-bit SDI, SMPTE-259 |
|
Analog: |
Composite/S-Video: NTSC, NTSCJ,
PAL
10-bit A/D, 2x oversampling
3 line adaptive comb filter decoding
+/-.25 db to 5.0 MHz Y Frequency Response
+/-.25 db to 1 MHz C Frequency Response
.5% 2T Pulse Response
1.5% Diff Phase
1.5% Diff Gain
Component: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
10-bit A/D, 2x oversampling
+/- .25db to 5.5MHz Y Frequency Response
+/- .25db to 2.5MHz C Frequency Response
.5% 2T Pulse Response
2ns Y/C delay inequity |
|
Video Output |
Digital: |
8 or 10-bit SDI, SMPTE-259 |
|
Analog: |
Composite/S-Video: NTSC, NTSCJ,
PAL
12-bit D/A, 8x oversampling
+/- .2 db to 5 MHz Y Frequency Response
+/- .2 db to 1 MHz C Frequency Response
.5% 2T Pulse Response
1% Diff Phase
1% Diff Gain
Component: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12-bit D/A, 8x oversampling
+/- .2 db to 5.5 MHz Y Frequency Response
+/- .2 db to 2.5 MHz C Frequency Response
.5% 2T Pulse Response
1 ns Y/C delay inequity |
|
Audio Input |
Digital: |
24-bit AES/EBU, 48kHz sample rate, synchronous or non-synchronous
24-bit SMPTE-259 SDI embedded audio, 8CH, 48kHz synchronous
ADAT, 8-channel optical, synchronous or non-synchronous, 24-bit
48kHz
SPDIF, 2 channel optical, synchronous or non-synchronous, 24-bit
48kHz |
|
Analog: |
Balanced/unbalanced input
+24dbu Full Scale Digital
24-bit A/D, 48kHz sample rate
+/- 0.2db 20 to 20kHz Frequency Response |
|
Audio Output |
Digital: |
24-bit AES/EBU, 48kHz sample rate
24-bit SMPTE-259 SDI embedded audio, 8CH, 48 kHz synchronous
ADAT, 8CH Optical, 24-bit 48 kHz
SPDIF, 2 channel optical, 24-bit, 48kHz |
|
Analog: |
Balanced output (XLR and 25 pin D)
+24 dbu Full Scale Digital (0dbFS)
24-bit D/A, 48kHz Sample Rate
+/- 0.2db 20 to 20kHz Frequency Response |
|
Reference Input |
Analog Color Black,
Non-Terminating, Looping, 75Ω |
|
AudioWord Clock |
Audioword Clock, 48kHz, 3V TTL, 75Ω |
|
Machine Control |
RS-422, Sony 9-pin Protocol |
|
FireWire |
IEEE-1394a, 400Mb/s, 6-pin |
|
Dimensions |
17.25W x 11D x 3.5H |
|
){kind=small}
){kind=small}
