AEMC Catalog | AEMC Price List

<< AEMC AC Current Probes

AEMC MN300 Series
AC Current Probes

AEMC MN306 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN306 is designed for low AC current measurements up to 10A, such as secondary of CTs or even small motors and appliances. It offers a higher voltage output of 100mV per Amp (1VAC @ 10AAC) for enhanced sensitivity at lower levels, while offering a high crest factor at full range. The MN306 has a jack output that accepts 4mm banana plugs.

AEMC MN306 Shown
 

Product Information
Datasheet	62 KB
PDF Help

AEMC MN307 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN307 is designed for low AC current measurements up to 10A, such as secondary of CTs or even small motors and appliances. It offers a higher voltage output of 100mV per Amp (1VAC @ 10AAC) for enhanced sensitivity at lower levels, while offering a high crest factor at full range. The MN307 has an integral 5ft (1.5m) lead terminated by shrouded banana plugs.

AEMC MN307 Shown

Product Information
Datasheet	62 KB
PDF Help

AEMC MN312 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN312 is a high accuracy and lower phase shift AC current probe. It has a 1000:1 ratio and an output of 1mA per A in the primary (inside the jaws). The MN312 has a jack output that accepts 4mm banana plugs. The MN312 has a protective diode across the output that limits the voltage in the case of an open secondary.

AEMC MN312 Shown

Product Information
Datasheet	62 KB
PDF Help

AEMC MN313 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN313 is a high accuracy and lower phase shift AC current probe. It has a 1000:1 ratio and an output of 1mA per A in the primary (inside the jaws). The MN313 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. The MN313 has a protective diode across the output that limits the voltage in the case of an open secondary.

AEMC MN313 Shown

Product Information
Datasheet	62 KB
PDF Help

AEMC MN352 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN352 is a high accuracy and low phase shift AC current probe with voltage output. It is designed for use with DMMs or current measuring instruments with voltage inputs. The voltage output is proportional to the current measured (through the jaws). The MN352 has a jack output that accepts 4mm banana plugs.

AEMC MN352 Shown

Product Information
Datasheet	62 KB
PDF Help

AEMC MN353 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

 The MN353 is a high accuracy and low phase shift AC current probe with voltage output. It is designed for use with DMMs or current measuring instruments with voltage inputs. The voltage output is proportional to the current measured (through the jaws). The MN353 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

AEMC MN353 Shown

Product Information
Datasheet	62 KB
PDF Help

AEMC MN373 AC Current Probes

• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

The MN373 is a dual range current probe designed to measure low current (to 200A) with high accuracy and phase shift. The MN373 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

AEMC MN373 Shown

Product Information
Datasheet	62 KB
PDF Help